Perform this procedure to unencapsulate the root disk.
Ensure that only Solaris root file systems—root (/), swap, the global devices namespace, /usr, /var, /opt, and /home—are present on the root disk.
If any other file systems reside on the root disk, back them up and remove them from the root disk.
Become superuser on the node you intend to unencapsulate.
Evacuate all resource groups and device groups from the node.
# scswitch -S -h node |
Evacuates all resource groups and device groups
Specifies the name of the node from which to evacuate resource or device groups
Determine the node ID number of the node.
# clinfo -n N |
Unmount the global-devices file system for this node, where N is the node ID number returned in Step 4.
# umount /global/.devices/node@N |
View the /etc/vfstab file and determine which VxVM volume corresponds to the global-devices file system.
# vi /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # #NOTE: volume rootdiskxNvol (/global/.devices/node@N) encapsulated #partition cNtXdYsZ |
Remove the VxVM volume that corresponds to the global-devices file system from the rootdg disk group.
# vxedit -rf rm rootdiskxNvol |
Do not store data other than device entries for global devices in the global-devices file system. All data in the global-devices file system is destroyed when you remove the VxVM volume. Only data related to global devices entries is restored after the root disk is unencapsulated.
Unencapsulate the root disk.
# /etc/vx/bin/vxunroot |
See your VxVM documentation for details.
Use the format(1M) command to add a 512-Mbyte partition to the root disk to use for the global-devices file system.
Use the same slice that was allocated to the global-devices file system before the root disk was encapsulated, as specified in the /etc/vfstab file.
Set up a file system on the partition you created in Step 9.
# newfs /dev/rdsk/cNtXdYsZ |
Determine the device ID (DID) name of the root disk.
# scdidadm -l cNtXdY 1 phys-schost-1:/dev/rdsk/cNtXdY /dev/did/rdsk/dN |
In the /etc/vfstab file, replace the path names in the global-devices file system entry with the DID path you identified in Step 11.
The original entry would look similar to the following.
# vi /etc/vfstab /dev/vx/dsk/rootdiskxNvol /dev/vx/rdsk/rootdiskxNvol /global/.devices/node@N ufs 2 no global |
The revised entry that uses the DID path would look similar to the following.
/dev/did/dsk/dNsX /dev/did/rdsk/dNsX /global/.devices/node@N ufs 2 no global |
Mount the global-devices file system.
# mount /global/.devices/node@N |
From one node of the cluster, repopulate the global-devices file system with device nodes for any raw disk and Solstice DiskSuite/Solaris Volume Manager devices.
# scgdevs |
VxVM devices are recreated during the next reboot.
Reboot the node.
# reboot |
Repeat this procedure on each node of the cluster to unencapsulate the root disk on those nodes.