Message IDs 300000–399999

300278 Validate - CON_LIMIT=%s is incorrect, default CON_LIMIT=70 is being used

Description:

The value specified for CON_LIMIT is invalid.

Solution:

Either accept the default value of CON_LIMIT=70 or change the value of CON_LIMIT to be less than or equal to 100 when registering the resource.

300598 Validate - Winbind configuration directory %s does not exist

Description:

The Winbind configuration directory does not exist.

Solution:

Check that the correct Winbind configuration directory was entered when registering the Winbind resource and that the directory exists.

300956 stopped SAA rc<>

Description:

SAA stopped with result code <

Solution:

None ... normal message when SAA gets stopped.

303009 validate: EnvScript $Filename does not exist but it is required

Description:

The environment script $Filename is set in the parameter file but does not exist.

Solution:

Set the variable EnvScript in the parameter file mentioned in option -N of the start, stop and probe command to a valid contents.

306944 Validate - Only SUNWfiles or SUNWbinfiles are supported

Description:

The DHCP resource requires that that the /etc/inet/dhcpsvc.conf file has RESOURCE=SUNWfiles or SUNWbinfiles.

Solution:

Ensure that /etc/inet/dhcpsvc.conf has RESOURCE=SUNWfiles or SUNWbinfiles by configuring DHCP appropriately, i.e. as defined within the Sun Cluster 3.0 Data Service for DHCP.

310640 runmqtrm - %s

Description:

The following output was generated from the runmqtrm command.

Solution:

None, if the command was successful, otherwise examine the other syslog messages occurring at the same time on the same node, to see if the cause of the problem can be identified.

311639 check_dhcp - Active interface has changed from %s to %s

Description:

The DHCP resource's fault monitor has detected that the active interface has changed.

Solution:

None, the fault monitor will restart the DHCP server.

316019 WebSphere MQ Channel Initiator %s started

Description:

The WebSphere MQ Channel Initiator has been started.

Solution:

None.

319873 ERROR: stop_mysql Option -R not set

Description:

The -R option is missing for stop_mysql command.

Solution:

Add the -R option for stop_mysql command.

327437 runmqchi - %s

Description:

The following output was generated from the runmqchi command.

Solution:

None, if the command was successful, otherwise examine the other syslog messages occurring at the same time on the same node, to see if the cause of the problem can be identified.

333890 ERROR: stop_mysql Option -D not set

Description:

The -D option is missing for stop_mysql command.

Solution:

Add the -D option for stop_mysql command.

335316 ERROR: start_mysql Option -H not set

Description:

The -H option is missing for start_mysql command.

Solution:

Add the -H option for start_mysql command.

336128 start_winbind - Could not start winbind

Description:

The Winbind resource could not start winbind.

Solution:

Examine the other syslog messages occurring at the same time on the same node, to see if the cause of the problem can be identified. If required turn on debug for the resource. Please refer to the data service documentation to determine how to do this.

339206 validate: An invalid option entered or

Description:

There is an invalid variable set the parameter file mentioned in option -N to a of the start, stop and probe command or the first character of a

Solution:

Fix the parameter file mentioned in option -N to a of the start, stop and probe command to valid contents

340441 Unexpected - test_rdbms_pid<%s>

Description:

The fault monitor found an unexpected error with testing the RDBMS.

Solution:

Examine the other syslog messages occurring at the same time on the same node, to see if the cause of the problem can be identified. If required turn on debug for the resource. Please refer to the data service documentation to determine how to do this

341702 could not start swa_rpcd, aborting

Description:

swa_rpcd could not be started.

Solution:

Check configuration of SAA.

357988 set_status - rc<%s> type<%s>

Description:

If the call to scha_resource_setstatus returns an error, the resource's fault probe sets the appropriate return code from scha_resource_setstatus call.

Solution:

Examine the other syslog messages occurring at the same time on the same node, to see if the cause of the problem can be identified

382114 start_dhcp - DHCP batch job failed rc<%s>

Description:

Whenever the DHCP server has switched over to another node, the DHCP network table is updated via a batch job running pntadm commands. This message is produced if the submission of that batch job fails.

Solution:

Please refer to the pntadm(1M) man page.

382661 WebSphere MQ Broker Queue Manager available

Description:

The WebSphere MQ Broker is dependent on the WebSphere MQ Broker Queue Manager. This message simple informs that the WebSphere MQ Broker Queue Manager is available.

Solution:

None.

398643 Validate - nmblookup %s non-existent executable

Description:

The Samba resource tries to validate that the nmblookup program exists and is executable.

Solution:

Check the correct pathname for the Samba bin directory was entered when registering the resource and that the program exists and is executable.