기존 클러스터에 새 노드를 추가하려면 이 절차를 수행하십시오.
새 클러스터 노드에 하드웨어를 설치합니다.
노드에 호스트 어댑터를 설치하고 기존 클러스터 상호 연결이 새 노드를 지원할 수 있는지 확인합니다.
Sun Cluster Hardware Administration Manual for Solaris OS를 참조하십시오.
추가 저장소를 설치합니다.
Sun Cluster 3.x Hardware Administration Collection의 해당 설명서를 참조하십시오.
Sun Cluster 소프트웨어를 지원하도록 Solaris 운영 환경이 설치되었는지 확인하십시오.
노드에 Solaris 소프트웨어가 이미 설치된 경우에도 설치된 Solaris 소프트웨어가 Sun Cluster 소프트웨어와 클러스터에 설치할 다른 소프트웨어의 요구 사항을 충족시켜야 합니다. Sun Cluster 소프트웨어 요구 사항을 충족하도록 Solaris 소프트웨어를 설치하는 방법에 대한 자세한 내용은 Solaris 소프트웨어를 설치하는 방법 를 참조하십시오.
Sun Cluster 소프트웨어가 노드에 설치되는지 확인합니다.
Sun Cluster 소프트웨어 패키지 설치 방법 을 참조하십시오.
다음 구성 워크시트를 완료하십시오.
표 2–9 추가 노드 구성 워크시트
계획 방법은 Solaris 운영 환경 계획 및 Sun Cluster 환경 계획를 참조하십시오.
단일 노드 클러스터에 이 노드를 추가하시겠습니까?
기존 클러스터 노드에서 두 클러스터의 상호 연결이 이미 존재하는지 여부를 확인합니다.
최소한 두 개의 케이블 또는 두 개의 어댑터가 구성되어 있어야 합니다.
# scconf -p | grep cable # scconf -p | grep adapter |
새 클러스터 상호 연결을 구성합니다.
기존 클러스터 노드에서 scsetup(1M) 유틸리티를 시작합니다.
# scsetup |
Cluster interconnect를 선택합니다.
Add a transport cable을 선택합니다.
화면 지시에 따라 클러스터에 추가할 노드의 이름, 전송 어댑터 이름, 전송 연결 장치 사용 여부 등을 지정합니다.
필요한 경우 단계 c를 반복하여 두 번째 클러스터 상호 연결을 구성합니다.
구성이 완료되면 scsetup 유틸리티를 종료합니다.
클러스터에 두 개의 클러스터 상호 연결이 구성되어 있는지 확인합니다.
# scconf -p | grep cable # scconf -p | grep adapter |
이 명령은 최소한 두 개의 클러스터 상호 연결에 대한 구성 정보를 출력해야 합니다.
인증된 클러스터 노드 목록에 새 노드를 추가합니다.
활성 클러스터 구성원에서 scsetup(1M) 유틸리티를 시작합니다.
# scsetup |
주 메뉴가 표시됩니다.
새 노드를 선택합니다.
추가하는 위치의 시스템 이름을 지정하십시오를 선택합니다.
화면에 표시되는 메시지에 따라 인식된 시스템 목록에 노드 이름을 추가합니다.
작업이 성공적으로 수행되었는지 확인합니다.
작업이 오류 없이 완료된 경우 scsetup 유틸리티는 명령이 성공적으로 완료되었습니다라는 메시지를 인쇄합니다.
scsetup 유틸리티를 종료합니다.
구성할 클러스터 노드에서 수퍼유저가 되십시오.
scinstall 유틸리티를 시작하십시오.
# /usr/cluster/bin/scinstall |
이 지침에 따라 대화식 scinstall 유틸리티를 사용하십시오.
대화식 scinstall 유틸리티에서는 사용자가 먼저 입력할 수 있습니다. 따라서 바로 다음 메뉴 화면이 나타나지 않을 경우에 Return 키를 두 번 이상 누르지 마십시오.
다른 지시가 없을 경우에는 Control-D를 눌러 관련 질문의 시작 부분이나 주 메뉴로 돌아갈 수 있습니다.
질문의 끝에 기본 응답이나 이전 세션에 대한 응답이 괄호([ ]) 안에 표시됩니다. Return 키를 누르면 별도의 입력 없이 괄호 안의 응답을 선택할 수 있습니다.
Main Menu에서 Install a cluster or cluster node를 선택합니다.
*** Main Menu *** Please select from one of the following (*) options: * 1) Install a cluster or cluster node 2) Configure a cluster to be JumpStarted from this install server 3) Add support for new data services to this cluster node * 4) Print release information for this cluster node * ?) Help with menu options * q) Quit Option: 1 |
Install Menu에서 Add this machine as a node in an existing cluster를 선택합니다.
화면에 표시되는 메뉴에 따라 단계 4에서 완료한 표 2–9에 대한 답을 입력하십시오.
scinstall 유틸리티가 노드를 구성하고 노드를 클러스터로 부트합니다.
추가 노드가 모두 구성될 때까지 클러스터에 추가할 다른 노드에 대해 이 절차를 반복합니다.
활성 클러스터 구성원에서 노드가 클러스터에 연결되지 않도록 하십시오.
# /usr/cluster/bin/scconf -a -T node=. |
추가합니다
인증 옵션을 지정합니다
노드 이름(.)을 지정하여 인증 목록에 추가하고 다른 노드가 클러스터에 추가되지 않게 합니다.
대신 scsetup(1M) 유틸리티를 사용할 수 있습니다. 해당 절차는 Solaris OS용 Sun Cluster 시스템 관리 안내서의 “클러스터 노드 추가 및 제거”에 있는 “권한이 부여된 노드 목록에 노드를 추가하는 방법”을 참조하십시오.
SPARC: VERITAS File System을 설치하시겠습니까?
그러면 SPARC: VERITAS File System 소프트웨어 설치 방법로 이동하십시오.
아니면 이름 서비스 조회 순서를 설정하십시오. 이름 서비스 스위치를 구성하는 방법 로 이동하십시오.
다음은 실행된 scinstall 명령과 scinstall 명령이 노드 phys-schost-3에서 구성 작업을 완료할 때 유틸리티가 기록하는 메시지의 예입니다. 스폰서 노드는 phys-schost-1입니다.
>>> Confirmation <<< Your responses indicate the following options to scinstall: scinstall -ik \ -C sc-cluster \ -N phys-schost-1 \ -A trtype=dlpi,name=hme1 -A trtype=dlpi,name=hme3 \ -m endpoint=:hme1,endpoint=switch1 \ -m endpoint=:hme3,endpoint=switch2 Are these the options you want to use (yes/no) [yes]? Do you want to continue with the install (yes/no) [yes]? Checking device to use for global devices file system ... done Adding node "phys-schost-3" to the cluster configuration ... done Adding adapter "hme1" to the cluster configuration ... done Adding adapter "hme3" to the cluster configuration ... done Adding cable to the cluster configuration ... done Adding cable to the cluster configuration ... done Copying the config from "phys-schost-1" ... done Setting the node ID for "phys-schost-3" ... done (id=3) Verifying the major number for the "did" driver with "phys-schost-1" ...done Checking for global devices global file system ... done Updating vfstab ... done Verifying that NTP is configured ... done Installing a default NTP configuration ... done Please complete the NTP configuration after scinstall has finished. Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done Adding the "cluster" switch to "hosts" in nsswitch.conf ... done Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done Verifying that power management is NOT configured ... done Unconfiguring power management ... done /etc/power.conf has been renamed to /etc/power.conf.61501001054 Power management is incompatible with the HA goals of the cluster. Please do not attempt to re-configure power management. Ensure that the EEPROM parameter "local-mac-address?" is set to "true" ...done Ensure network routing is disabled ... done Network routing has been disabled on this node by creating /etc/notrouter. Having a cluster node act as a router is not supported by Sun Cluster. Please do not re-enable network routing. Log file - /var/cluster/logs/install/scinstall.log.9853 Rebooting ... |