Connecting SCI Adapter Cards in a Two-Node Network

This section explains how to create a two-node SCI network that does not use an SCI switch.

1. Position the nodes in the desired locations.

2. Use an 80-line SCI station cable to connect the SCI adapter card of one node to the SCI adapter card of the other node.

   If each of your nodes has two SCI adapter cards, use two SCI cables, one for each pair of adapter cards. See Figure 2-1 for examples.

3. Connect the node power cords to the appropriate power outlets.

4. Turn the node power switches on and boot the nodes.

   Figure 2-1 Examples of Two-Node Unswitched SCI Connections