“Preparing Systems for Sun Management Center Upgrade and Installation” Chapter

The title and description for the section“Sun StorEdge^TM A500 Patches” in the Sun Management Center 3.5 Installation and Configuration Guide are wrong. The correct title is Sun StorEdge A5x00 Packages (not Patches).

The following is the correct description for the section Sun StorEdge A5x00 Packages:

If you want to use the Sun StorEdge A5x00 module, you must install the SUNWluxop and SUNWluxox packages on the system where you install the Monitoring and Management of A5x00 and T3 Devices add-on product. If you load the A5x00 module, and the packages are not installed on the system, the Sun Management Center agent cannot run.

To check whether the packages are installed, type the following command:

# pkginfo SUNWluxop SUNWluxox

If the packages are installed, the following lines are displayed:

system  SUNWluxop  Sun Enterprise Network Array firmware and utilities
system  SUNWluxox  Sun Enterprise Network Array libraries (64-bit)

If you need either package, you can download the package from http://sunsolve.sun.com. Make sure that you download the latest revision. Use the pkgadd(1M) command to install the packages.

Sun Management Center 3.5 Update 1 requires the latest patch for the SUNWluxop package. See A5x00 Module Does Not Populate Tables With Values (4973319).