Sun Systems Supported by Sun Management Center 3.6.1

The following table lists the Sun systems supported by Sun Management Center 3.6.1.

Table 3–2 Sun Systems Supported by Sun Management Center 3.6.1

System Type	Model
CoolThreadsTM Servers	Sun Fire T1000
	Sun Fire T2000
Sun Fire Entry-level Servers	Sun Fire V100
	Sun Fire V120
	Sun Fire V210
	Sun Fire V240
	Sun Fire V250
	Sun Fire V440
	Sun Fire 280R
Sun Fire Midrange and High-end Servers	Sun Fire V490/V480
	Sun Fire V890/V880
	Sun Fire E2900/V1280
	Sun Fire E4900
	Sun Fire E6900
	Sun Fire E25K/E20K
	Sun Fire 15K/12K
	Sun Fire 6800/4810/4800/3800
Carrier-Grade Servers	Netra 1290 [Need to download Sun Management Center 3.6 Version 3 Add-on Software. See Support for Netra 1290 Systems Available in Release 3.6 Version 3 for more information.]
	Netra 1280
	Netra 120
	Netra 210
	Netra 240
	Netra 440
	Netra 20
	Netra t 1120/1125
	Netra t 1400/1405
Desktop	Sun Ultra 45
	Sun Blade 100
	Sun Blade 150
	Sun Blade 1000
	Sun Blade 1500
	Sun Blade 2000
	Sun Blade 2500

UltraSparc IV+ CPU/Memory boards are supported on the following platforms:

• Sun Fire V890/V490

• Sun Fire E2900

• Sun Fire E6900/E4900

• Sun Fire E25K/E20K

Support for Netra 1290 Systems Available in Release 3.6 Version 3

Support for Netra 1290 systems is available in the recently released Sun Management Center 3.6 Version 3 Add-On Software for Sun Fire Entry-Level Midrange Systems.

---

Note –

Even if you have previously installed the release 3.6 Version 3 add-on software, you must install it again after installing the core 3.6.1 software.

For information about installing this add-on software with the core Sun Management Center 3.6.1 software, refer to Installing Sun Management Center 3.6 Version 3 Add-On Software for Sun Fire Entry-Level Midrange Systems: Required for Netra 1290 Systems.

For information about installing this add-on software later, after installing the core Sun Management Center 3.6.1 software, refer to the Sun Management Center 3.6 Version 3 Add-On Software Release Notes for Sun Fire Entry-Level Midrange Systems and follow the instructions in the section “Updating From Sun Management Center 3.6 Software,” replacing references to the core Sun Management Center 3.6 software with “3.6.1.” The release notes document is available at http://docs.sun.com/.

---