The following table lists the Sun systems supported by Sun Management Center 3.6.1.
Table 3–2 Sun Systems Supported by Sun Management Center 3.6.1
System Type |
Model |
---|---|
CoolThreadsTM Servers |
Sun Fire T1000 |
Sun Fire T2000 |
|
Sun Fire Entry-level Servers |
Sun Fire V100 |
Sun Fire V120 |
|
Sun Fire V210 |
|
Sun Fire V240 |
|
Sun Fire V250 |
|
Sun Fire V440 |
|
Sun Fire 280R |
|
Sun Fire Midrange and High-end Servers |
Sun Fire V490/V480 |
Sun Fire V890/V880 |
|
Sun Fire E2900/V1280 |
|
Sun Fire E4900 |
|
Sun Fire E6900 |
|
Sun Fire E25K/E20K |
|
Sun Fire 15K/12K |
|
Sun Fire 6800/4810/4800/3800 |
|
Carrier-Grade Servers |
Netra 1290 [Need to download Sun Management Center 3.6 Version 3 Add-on Software. See Support for Netra 1290 Systems Available in Release 3.6 Version 3 for more information.] |
Netra 1280 |
|
Netra 120 |
|
Netra 210 |
|
Netra 240 |
|
Netra 440 |
|
Netra 20 |
|
Netra t 1120/1125 |
|
Netra t 1400/1405 |
|
Desktop |
Sun Ultra 45 |
Sun Blade 100 |
|
Sun Blade 150 |
|
Sun Blade 1000 |
|
Sun Blade 1500 |
|
Sun Blade 2000 |
|
Sun Blade 2500 |
UltraSparc IV+ CPU/Memory boards are supported on the following platforms:
Sun Fire V890/V490
Sun Fire E2900
Sun Fire E6900/E4900
Sun Fire E25K/E20K
Support for Netra 1290 systems is available in the recently released Sun Management Center 3.6 Version 3 Add-On Software for Sun Fire Entry-Level Midrange Systems.
Even if you have previously installed the release 3.6 Version 3 add-on software, you must install it again after installing the core 3.6.1 software.
For information about installing this add-on software with the core Sun Management Center 3.6.1 software, refer to Installing Sun Management Center 3.6 Version 3 Add-On Software for Sun Fire Entry-Level Midrange Systems: Required for Netra 1290 Systems.
For information about installing this add-on software later, after installing the core Sun Management Center 3.6.1 software, refer to the Sun Management Center 3.6 Version 3 Add-On Software Release Notes for Sun Fire Entry-Level Midrange Systems and follow the instructions in the section “Updating From Sun Management Center 3.6 Software,” replacing references to the core Sun Management Center 3.6 software with “3.6.1.” The release notes document is available at http://docs.sun.com/.