Sun Blade T6300 Server Module Administration Guide
820-0277-10
Contents |
1. Configuring the System Console
What the ALOM System Controller Console Does
Default System Console Connection Through the Serial Port and Network Management Ports
Accessing the System Controller
Activating the Network Management Port
Accessing the System Console Through a Terminal Server
To Access The System Console Through a Terminal Server
Accessing the System Console Through a TIP Connection
To Access the System Console Through a TIP Connection
Modifying the /etc/remote File
To Modify the /etc/remote File
Accessing the System Console Through an Alphanumeric Terminal
To Access the System Console Through an Alphanumeric Terminal
Switching Between the ALOM System Controller and the System Console
Access Through Multiple Controller Sessions
Methods to Reach the ok Prompt
ALOM System Controller break or console Command
L1-A (Stop-A) Keys or Break Key
For More Information About OpenBoot Firmware
System Console OpenBoot Configuration Variable Settings
2. Managing RAS Features and System Firmware
To Turn On the Locator LED From the ALOM System Controller Command Prompt
To Turn Off the Locator LED From the ALOM System Controller Command Prompt
To Display the State of the Locator LED From the ALOM System Controller Command Prompt
To Enable an Automatic Degraded Boot
Automatic System Recovery User Commands
Enabling and Disabling Automatic System Recovery
To Enable Automatic System Recovery
To Disable Automatic System Recovery
Obtaining Automatic System Recovery Information
Unconfiguring and Reconfiguring Devices
To Unconfigure a Device Manually
To Reconfigure a Device Manually
Displaying System Fault Information
To Display System Fault Information
For More Information on Multipathing Software
To Store Information in Available FRU PROMs
A. OpenBoot Configuration Variables
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.