|
local-mac-address?
|
true, false
|
true
|
If true, network drivers use their own MAC address, not the server MAC address.
|
|
fcode-debug?
|
true, false
|
false
|
If true, include name fields for plug-in device FCodes.
|
|
scsi-initiator-id
|
0-15
|
7
|
SCSI ID of the Serial Attached SCSI controller.
|
|
oem-logo?
|
true, false
|
false
|
If true, use custom OEM logo; otherwise, use Sun logo.
|
|
oem-banner?
|
true, false
|
false
|
If true, use custom OEM banner.
|
|
ansi-terminal?
|
true, false
|
true
|
If true, enable ANSI terminal emulation.
|
|
screen-#columns
|
0-n
|
80
|
Sets number of columns on screen.
|
|
screen-#rows
|
0-n
|
34
|
Sets number of rows on screen.
|
|
ttya-rts-dtr-off
|
true, false
|
false
|
If true, operating system does not assert rts (request-to-send) and dtr (data-transfer-ready) on serial management port.
|
|
ttya-ignore-cd
|
true, false
|
true
|
If true, operating system ignores carrier-detect on serial management port.
|
|
ttya-mode
|
9600,8,n,1,-
|
9600,8,n,1,-
|
Serial management port (baud rate, bits, parity, stop, handshake). The serial management port only works at the default values.
|
|
output-device
|
virtual-console, screen
|
virtual-console
|
Power-on output device.
|
|
input-device
|
virtual-console, keyboard
|
virtual-console
|
Power-on input device.
|
|
auto-boot-on-error?
|
true, false
|
false
|
If true, boot automatically after system error.
|
|
load-base
|
0-n
|
16384
|
Address.
|
|
auto-boot?
|
true, false
|
true
|
If true, boot automatically after power on or reset.
|
|
boot-command
|
variable-name
|
boot
|
Action following a boot command.
|
|
use-nvramrc?
|
true, false
|
false
|
If true, execute commands in NVRAMRC during server startup.
|
|
nvramrc
|
variable-name
|
none
|
Command script to execute if use-nvramrc? is true.
|
|
security-mode
|
none, command, full
|
none
|
Firmware security level.
|
|
security-password
|
variable-name
|
none
|
Firmware security password if security-mode is not none (never displayed). Do not set this directly.
|
|
security-#badlogins
|
variable-name
|
none
|
Number of incorrect security password attempts.
|
|
diag-switch?
|
true, false
|
false
|
If true:
- OpenBoot verbosity is set to maximum
If false:
- OpenBoot verbosity is set to minimum
|
|
error-reset-recovery
|
boot, sync, none
|
boot
|
Command to execute following a system reset generated by an error.
|
|
network-boot-arguments
|
[protocol, ] [key=value, ]
|
none
|
Arguments to be used by the PROM for network booting. Defaults to an empty string. network-boot-arguments can be used to specify the boot protocol (RARP/DHCP) to be used and a range of system knowledge to be used in the process. For further information, see the eeprom (1M) man page or your Solaris Reference Manual..
|
