| Netra CP2160 CompactPCI Board Installation and Technical Reference Manual |     |
| Netra CP2160 CompactPCI Board Installation and Technical Reference Manual | |
Netra CP2160 CompactPCI Board Installation and Technical Reference Manual
816-5772-11
|
Contents |
Safety Agency Compliance Statements
Regulatory Compliance Statements
1. Overview of the Netra CP2160 CompactPCI Board
1.1 Features of the Netra CP2160 CompactPCI Board
1.2 Netra CP2160 System Configurations
1.2.1 System Host and Satellite Configurations
1.5 Technical Support and Warranty
1.5.1 Board Part Number, Serial Number, and Revision Number Identification
2.1 Hot-Swapping a Netra CP2160 Satellite Board
2.2 Peripheral I/O Board Configuration
2.2.1 Configuring a Peripheral I/O Board in Basic Hot-Swap Mode
2.2.2 Unconfiguring a Peripheral I/O Board in Basic Hot-Swap Mode
2.3 Setting Up a Diskless Environment
2.3.1 How to Set Up a Boot Server
2.3.2 How to Boot as a Diskless Client
2.4 Setting the Time of Day on a Battery-less System
2.4.1 In a Networked Configuration
3.1 Equipment and Operator Safety
3.2 Preparing for Installation
3.2.1 Checking Power, Thermal, Environmental, and Space Requirements
3.2.2 Determining Local Network IP Addresses and Hostnames
3.2.3 Installation Procedure Summary
3.3 Configuring the Netra Board Hardware
3.3.1 Installing the Memory Module
3.3.2 Installing the PMC Module
3.3.4 Replacing the Serial EEPROM
3.3.5 Configuring Transition Card Hardware
3.3.5.1 Installing PIM Assemblies
3.4 Installing Boards Into the CompactPCI Chassis
3.4.1 Installing the XCP2060-TRN I/O Transition Card
3.4.2 Installing the Netra CP2160 Board
3.5 Setting Up an Assembled Netra CP2160 Board Computer
3.6 Initial Power On and Firmware Upgrade
3.6.2 Determining the Firmware Version
3.6.2.1 Determining the Firmware Version From OpenBoot PROM
3.6.2.2 Determining the Firmware Version From the Solaris Prompt
3.6.3 Upgrading the OpenBoot PROM Firmware
3.7.1 Installing the Operating System
3.7.2 Downloading and Installing SunVTS
4.2 Firmware Configuration Variables
4.2.1 Firmware CORE SRAM Variables
4.2.2 Firmware CORE Execution Control
4.2.3 OpenBoot PROM Configuration Variables
4.6 ASM Support at OpenBoot PROM
4.6.1 CPU Heat Sink Thermal Sensor
4.6.2 PCI_RESET# Polling on the Satellite Board
4.7.1 SMC Firmware Reset Modes for System Slot and Peripheral Slot Operations
4.8.1 Setting Diagnostic Levels
4.8.3 Comprehensive POST (CPOST)
4.8.4 OpenBoot PROM On-Board Diagnostics
5. Hardware and Functional Description
5.1 Summarized Physical Description
5.3 CPU and Main Memory Subsystems
5.3.1 UltraSPARC IIi Processor
5.3.4.1 System (Boot) Flash Memory
5.4.2 PCIO-2 Devices and EBus Paths
5.4.3.1 Arbitration in System Controller Role
5.6 System Management Controller
5.8.2 Early Power and IPMI Power
5.8.3 Transition Card Power Distribution
5.9.1 CompactPCI Interface Requirements
5.9.2 CompactPCI Signal Interface
5.11 Chip-Select PLD Registers
A.1 System Compatibility Specifications
A.1.1 CPCI Specification Notes
A.3 Main Memory Specifications S
A.4 Memory Configuration Specifications
A.5 PMC Interface Specifications
A.8 Environmental Specifications
A.10 Reliability/Availability Specifications
A.11 Compliance Specifications
B. Connectors, Pinouts and Switch Settings
B.3 CompactPCI Backplane Connectors
D.1.1 Books and Specifications
D.2 Sun Microsystems Publications
D.2.1 Solaris Operating Environment
D.2.3 Processors and Integrated Circuits
D.2.4 CP2000/CP2160 Family System Documents
| Netra CP2160 CompactPCI Board Installation and Technical Reference Manual | 816-5772-11 | |
Copyright © 2004, Sun Microsystems, Inc. All Rights Reserved.