test

Sun Enterprise 220R Server Service Manual

7.7.2 What to Do

Note -

Perform this procedure with the power on and the keyswitch set to the Power-On/Off position.

  1. With the keyswitch in the Power-On/Off position, press the Break key on your alphanumeric terminal's keyboard, or enter the Stop-a sequence on a Sun keyboard.

    To enter the Stop-a sequence, press the Stop key and the a key simultaneously. The ok prompt is displayed.

  2. To set the diag-level variable, type the following:


    ok setenv diag-level value

The value can be off, min, or max. See "7.5.2 Configuration Variable" for information about each setting.