Sun Enterprise 250 Server Owner's Guide

How to Remove the Floor Casters Assembly

Before You Begin

Complete this task:

What to Do

  1. Carefully turn the system chassis upside down.

    Enlist the help of another person to accomplish this safely.

    Do not lift the chassis using the plastic panels at the front or the side of the chassis. Place the system onto a solid surface that spaces the unit about 2 inches (5 cm) off the floor; for example, use a pair of wooden boards. Do not allow any of the weight to rest on the plastic panels at the front of the chassis.

  2. Remove the eight Phillips screws that secure the floor casters assembly to the underside of the chassis.

  3. Remove the casters assembly and set it aside.


    Note -

    There are two foot glide mounting brackets attached to the underside of the chassis. Do not remove these brackets unless you are converting the chassis to a rackmount configuration.


    Figure 8-19  

    Graphic

What Next

To replace the floor casters assembly with foot glides, complete this task: