What to Do

1. Carefully turn the system chassis upside down.

   Enlist the help of another person to accomplish this safely.

   Do not lift the chassis using the plastic panels at the front or the side of the chassis. Place the system onto a solid surface that spaces the unit about 2 inches (5 cm) off the floor; for example, use a pair of wooden boards. Do not allow any of the weight to rest on the plastic panels at the front of the chassis.

   ---

   Note -

   The right side of the casters assembly mounts to the two foot glide mounting brackets on the underside of the chassis. If you removed these brackets previously, you must reinstall them now. See "How to Install the Chassis Foot Glides".

   ---

2. Align the holes in the floor casters assembly with the corresponding mounting holes on the underside of the chassis.

   Position the casters assembly with the four casters facing up. Align the two large holes in the assembly with the large holes in the chassis bottom.

Figure 8-20  

1. Secure the casters assembly to the chassis using the eight Phillips screws provided with the assembly.

2. Carefully return the chassis to its upright position.

   Enlist the help of another person to accomplish this safely. Do not lift the chassis using the plastic panels at the front or the side of the chassis.