A P P E N D I X B

System Specifications

This appendix provides the following specifications for the Sun Fire V445 server:

Reference for Physical Specifications

Reference for Electrical Specifications

Reference for Environmental Specifications

Reference for Agency Compliance Specifications

Reference for Clearance and Service Access Specifications

Reference for Physical Specifications

The dimensions and weight of the system are as follows.

TABLE B-1 Dimensions and Weight
Measurement	U.S.	Metric
Height	6.85 in.	17.5 cm
Width	17.48 in.	44.5 cm
Depth	25 in.	64.4 cm
Weight: Minimum Maximum	70 lbs 82 lbs	31 kg 37.2 kg
Power Cord	8.2 ft	2.5 m

Reference for Electrical Specifications

The following table provides the electrical specifications for the system. All specifications pertain to a fully configured system operating at 50 Hz or 60 Hz.

TABLE B-2 Electrical Specifications
Parameter	Value
Input
Nominal Frequencies	50 or 60 Hz
Nominal Voltage Range	100 to 240 VAC
Maximum Current AC RMS *	13.2 A @ 100 VAC 11 A @ 120 VAC 6.6 A @ 200 VAC 6.35 A @ 208 VAC 6 A @ 220 VAC 5.74 A @ 230 VAC 5.5A @ 240 VAC
Output
+12 VDC -12 VDC +5 VDC -5 VDC	0.5 to 45A 0 to 0.8A 0.5 to 28A 0.5 to 50A
Maximum DC Output of Two (2) Power Supplies	1100W Max AC power consumption 1320W for operation @ 100 VAC to 240 VAC Max heat dissipation 4505 BTUs/Hr for operation @ 200 VAC to 240 VAC.
Maximum AC Power Consumption	788W for operation @ 100 VAC to 240 VAC (maximum configuration)
Maximum Heat Dissipation	4505 Btu/hr for operation @ 100 VAC to 240 VAC

^{* Refers to total input current required for four AC inlets when operating with all four power supplies or current required for a dual AC inlet when operating with the minimum of two power supplies.}

Reference for Environmental Specifications

The operating and nonoperating environmental specifications for the system are as follows.

TABLE B-3 Environmental Specifications
Parameter	Value
Operating
Temperature	5°C to 35°C (41°F to 95°F) noncondensingIEC 60068-2-1&2
Humidity	20% to 80% RH noncondensing; 27°C max wet bulbIEC 60068-2- 3&56
Altitude	Up to 3000 meters, max ambient temperature is derated by 1°C per 500 meters above 500 meters IEC 60068-2-13
Vibration (random)	0.0001 g2/Hz, 5 to 150 Hz, -12db/octave slope 150 to 500 Hz
Shock	3.0 g peak, 11 milliseconds half-sine pulseIEC 60068-2-27
Nonoperating
Temperature	-40°C to 60°C (-40°F to 140°F)noncondensingIEC 60068-2-1&2
Humidity	Up to 93% RH noncondensing; 38°C max wet bulbIEC 60068-2-3&56
Altitude	0 to 12,000 meters (0 to 40,000 feet)IEC 60068-2-13
Vibration	0.001 g2/Hz, 5 to 150 Hz, -12db/octave slope 150 to 500 Hz
Shock	15.0 g peak, 11 milliseconds half-sine pulse; 1.0 inch roll-off front to back, 0.5 inch roll-off side to sideIEC 60068-2-27
Handling Drops	60 mm, 1 drop per corner, 4 cornersIEC 60068-2-31
Threshold Impact	0.85m/s, 3 impacts per caster, all 4 casters, 25 mm step-upETE 1010-01

Reference for Agency Compliance Specifications

The system complies with the following specifications.

TABLE B-4 Agency Compliance Specifications
Category	Relevant Standards
Safety	UL/CSA-60950-1, EN60950-1, IEC60950-1 CB Scheme with all country deviations, IEC825-1, 2, CFR21 part 1040, CNS14336
RFI/EMI	EN55022 Class A 47 CFR 15B Class A ICES-003 Class A VCCI Class A AS/NZ 3548 Class A CNS 13438 Class A KSC 5858 Class A EN61000-3-2 EN61000-3-3
Immunity	EN55024 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11
Telecommunications	EN300-386
Regulatory Marking	CE, FCC, ICES-003, C-tick, VCCI, GOST-R, BSMI, MIC, UL/cUL, UL/S-mark, UL/GS-mark

Reference for Clearance and Service Access Specifications

Minimum clearances needed for servicing the system are as follows.

TABLE B-5 Clearance and Service Access Specifications
Blockage	Required Clearance
Front of System	36 in (91.4 cm)
Back of System	36 in (91.4 cm)