Media Tray

To access the media tray:

1. Remove the front bezel. See "Front Bezel".

2. Loosen the two captive screws securing the media tray in the chassis.

3. Insert a screwdriver or similar instrument in the notch at the bottom center of the tray. Using the screwdriver, slightly pull out the tray. See Figure 12-2.

4. Grasp the media tray and gently pull it from the chassis.

   Disconnect the cables from the back of the tray.

5. To access the devices in the media tray, turn the tray over and place it upside down on top of the E3500 cabinet.

6. Loosen the four screws securing the drive to the media tray and remove the drive.

   Figure 12-2 Removing the Media Tray

   
   

To replace the media tray, reverse these procedures.