The top bezel must be removed to access the media tray and the key switch tray.
To remove the top bezel:
Remove the key from the key switch.
Grasp the bottom corners of both sides of the top bezel and pull it toward you.
Apply inward pressure (Figure 12-7) to release the snap locks on each side.
Tilt the top bezel upward to a 45o angle and remove the bezel.
To replace the top bezel, reverse these instructions.
To remove the media tray:
Remove the top bezel.
Loosen the three captive screws that hold the tray in place.
Insert a screwdriver in the notch at the top center of the media tray (Figure 12-8) to pull out the tray..
Remove the seven screws on top of the media tray (Figure 12-8) to lift off the tray cover to access CD and tape drives.
To replace the media tray, reverse these procedures.