Enterprise 6500/5500 Cabinet Systems

1. Notify users that the system is going down.

2. Back up the system files and data to tape, if necessary.

3. Halt the system using the appropriate commands.

   Refer to the Solaris Handbook for SMCC Peripherals that corresponds to your operating system.

4. Wait for the system-halted message and the boot monitor prompt.

5. Turn off the system power in this order:

1. External drives and expansion cabinets (if any)

2. System cabinet

3. Terminal

1. Turn the front panel key switch to the Standby position (Figure 11-1).

   Figure 11-1 Key Switch (Enterprise 6500 and 5500)

   
   

2. Turn the main power switch (Figure 11-2) to Off.

   ---

   Caution -

   Before attempting to service the system cabinet, turn off the AC power.

   ---

   Figure 11-2 AC Power Switch (Enterprise 6500 and 5500)