Sun Enterprise 6500/5500/4500 Systems Reference Manual

Replacing the Key Switch Adapter Assembly

  1. Carefully insert the key switch adapter assembly into the front of the Enterprise 6500 system.

    Caution - Caution -

    DO NOT FORCE the key switch adapter assembly into the slot; this can cause damage to the assembly and system.

    The key switch adapter assembly should insert and seat smoothly. If it binds, remove it, and inspect the slot for any obvious obstructions. Do not damage the springfingers at the bottom of the assembly.

  2. Tighten the two captive screws on the bottom that secure the key switch adapter assembly to the cabinet.

  3. Connect the cable assembly to the front of the key switch adapter assembly.

  4. Power on the Enterprise 6500 system.

    See the power on instructions in Chapter 11, Powering Off and On .