Sun Enterprise 6500/5500/4500 Systems Reference Manual

Removing a Memory Module

  1. Remove the CPU/Memory+ board from which the SIMM is to be removed. See "Removing a Board".

  2. Attach a wrist strap and place an antistatic surface next to the system.

  3. Use the system error messages to locate the slot (Figure 3-12) for the SIMM you need to replace.

  4. Eject the faulty SIMM by pressing down on the ejection levers on both sides of the SIMM connector (Figure 3-13).

    Figure 3-13 Ejecting a SIMM


  5. Holding the SIMM by its edges, remove it from the slot and place it on an antistatic surface.