Internal Access--Enterprise 4500 System

The top bezel must be removed to access the media tray and the key switch tray.

Top Bezel

To remove the top bezel:

1. Remove the key from the key switch.

2. Grasp the bottom corners of both sides of the top bezel and pull it toward you.

   Apply inward pressure (Figure 12-7) to release the snap locks on each side.

   Figure 12-7 Removing the Top Bezel/Panel

   
   

3. Tilt the top bezel upward to a 45^o angle and remove the bezel.

To replace the top bezel, reverse these instructions.

Media Tray

To remove the media tray:

1. Remove the top bezel.

2. Loosen the three captive screws that hold the tray in place.

3. Insert a screwdriver in the notch at the top center of the media tray (Figure 12-8) to pull out the tray..

4. Remove the seven screws on top of the media tray (Figure 12-8) to lift off the tray cover to access CD and tape drives.

   Figure 12-8 Removing the Media Tray

   
   

To replace the media tray, reverse these procedures.