Removing the Fan Tray Assembly

1. Power off the Enterprise system.

   See the power off instructions in Chapter 11, Powering Off and On .

2. Locate the fan tray assembly (Figure E-14) at the rear of the system.

   The fan tray is on the left side of the enclosure. It includes the power cord connector and the AC power switch.

3. Loosen the cable restrainer and disconnect the power cable from the fan tray assembly.

4. Loosen the two captive screws on the left side that secure the fan tray assembly to the enclosure.

5. Pull the end of the extraction lever outward to release the fan tray assembly from the centerplane.

6. Slowly remove the fan tray assembly from the enclosure.

   Figure E-14 Removing the Fan Tray from the Enterprise 4500 System