Open the AC socket cover (Figure 2-2) on the AC power sequencer and connect the AC power cord.
Plug the other end of the AC power cord into a grounded wall outlet.
The outlet must be a 200-240 VAC 30A circuit, dedicated solely to the server cabinet, as described in the site preparation instructions in Chapter 1.
Risk of electric shock. Do NOT turn on AC power to the unit yet.
Continue with Section 2.4 through Section 2.7 for further cabling instructions.
Insert the key provided with your system into the front panel key switch. Turn it to the Standby position (fully counterclockwise, Figure 2-3).
Turn the AC power switch (Figure 2-4) to Off.
Connect the power cord to the AC connector.
Connect the power cord to a grounded wall outlet.
The outlet must be a 100-240 VAC 15A circuit.
Do NOT turn on power to the unit yet.
Continue with Section 2.4 through Section 2.7 for further cabling instructions.