| Sun Remote System Control(RSC) 2.2.3 Release Notes |     |
| Sun Remote System Control(RSC) 2.2.3 Release Notes | |
Sun Remote System Control(RSC) 2.2.3 Release Notes
819-2022-10
|
Contents |
1. Sun Remote System Control (RSC) 2.2.3 Release Notes
Before Installing Sun Remote System Control Software
RSC 2.2.3 Support on Sun Fire V480, V880, V490 and V890 Servers
Removing and Installing the RSC or SC Card
Alert Messages Might Be Delayed
Wrong Information Provided on alerts.html
rsc-console Switches to tip Connection During Boot When diag-switch? Is Set to true
RSC bootmode -u Command Fails to Toggle the Console
Running obdiag in rsc-console Mode Can Cause Unexpected Behaviors
SetSockOpt: Invalid argument Message Received When Maximum Number of Telnet Sessions Is Reached
Disk Errors are Reported in loghistory While Running SunVTS, But No Errors are Reported in SunVTS or Solaris Software
RSC Issues for Sun Fire V480, V880, V490, and V890 Servers
RSC Console Switches to the System Console Without Warning When OpenBoot PROM Enhanced Diagnostics Are On or the Keyswitch Is in the Diagnostics Position
RSC Issues for Sun Fire 280R Servers
False Drive Fault Reported at Power-On
RSC Issues for Sun Enterprise 250 Servers
Increased Number of RSC User Accounts Not Supported
Change to the serial_hw_handshake Variable Requires a System Reboot
Power Supply Alerts Display Incorrect Index in the GUI
| Sun Remote System Control(RSC) 2.2.3 Release Notes | 819-2022-10 | |
Copyright © 2004, Sun Microsystems, Inc. All Rights Reserved.