Configuring a LAN Emulation Interface

To Configure a LAN Emulation Interface

1. On the Main Administration page, under "Network Connection Administration," click ATM.

   The ATM Administration page is displayed with configuration information for each port.

2. Click Configure a LAN Emulation Interface.

   An administration page for the chosen interface is displayed.

3. Complete the form using the information in the following table.

   Table 7-9 Information for ATM LAN Emulation Interface

   LAN Name	The name of an emulation LAN to join.
   Host Address	The host address for the network interface. This address should be unique on the system.
   Netmask	The netmask address that determines the network with which the host address is associated.  Example: 255.255.255.0

4. On the Main Administration page, under "System Administration," click Restart and Shutdown to restart the Netra server.

To Modify or Unconfigure a LAN Emulation Interface

1. On the Main Administration page, under "Network Connection Administration," click ATM.

   The ATM Administration page, with configuration information for each port, is displayed.

2. Choose one of the following.

   • To modify a LAN emulation interface, choose Modify for the required interface, and make the changes in the form using Table 7-9.

   • To unconfigure a LAN emulation interface, choose Unconfigure for the interface to be removed; then confirm the operation.

3. On the Main Administration page, under "System Administration," click Restart and Shutdown to restart the Netra server.