test

Netra j 3.0 Installation Guide

Hardware and Software Requirements

This section describes the hardware and software requirements for Netra j 3.0.

Hardware

The Netra j 3.0 software can run on any Sun(TM) 4u UltraSPARC(TM) or 4m hyperSPARC(TM) platform supported by the Solaris(TM) 2.5.1 or 2.6 operating environment.

Table 1-1 Examples of Netra j 3.0 Hardware Platforms

4m Platform 

4u Platform 

SPARCstation(TM) 4 

SPARCstation 5 

SPARCstation 10 

SPARCstation 20 

  

  

Ultra(TM) 1 

Ultra 2 

Ultra 5 

Ultra 10 

Ultra 30 

Enterprise 4500 

The standard installation of the Netra j 3.0 software requires at least 170 megabytes of disk space. The following table lists the disk space requirements for specific directories.

Table 1-2 Netra j 3.0 Software Disk Space Requirements

File System 

Space in Mbytes 

File System 

Space in Mbytes 

/

/export/home*

/opt

30 

5 x the_number_of_users

95 

/usr

/var

  

30 

10 

  

*When the default features of the Netra j 3.0 software are installed on the Netra j 3.0 server. 

If additional client-server software is installed, such as that on the Netra(TM) Ready(TM) CD, more disk space is needed. Refer to the that software's documentation for disk space requirements.

Note -

If you download the Netra j 3.0 software from the Web, you will need an additional 280 megabytes of temporary disk space in a download directory.

To verify your free disk space, type this command as the superuser: 

# df -lk

If the system to be configured as a Netra j 3.0 server is not already part of a functional network, then you will need a CD-ROM drive, monitor, keyboard, and mouse for installation and initial configuration. If the system is already part of a network, these tasks can be performed from a client.

Though not necessary, an internal diskette drive and an external tape drive are helpful accessories. An internal diskette drive enables you to back up the Netra j 3.0 server configuration onto removable media, for secure storage. An external tape drive enables you to back up portions of the Netra j 3.0 server file system.

Software

The system to be configured as a Netra j 3.0 server must contain the following software: