Figures

FIGURE 2-1 Example of a Server Room Layout

FIGURE 2-2 Example Configuration 1: Three Chassis, No External SCSI Devices

FIGURE 2-3 Example Configuration 2: Three Chassis, Two External SCSI Devices

FIGURE 2-4 Physical Specifications for the Netra CT Chassis

FIGURE 2-5 Netra CT 810 Server Physical Specifications

FIGURE 2-6 Netra CT 410 Server Physical Specifications

FIGURE 2-7 Installing a Grounding Plate

FIGURE 2-8 Airflow, Netra CT 410 Server (Side View)

FIGURE 2-9 Airflow, Netra CT 810 Server (Side View)

FIGURE 3-1 Center-Mounting the Chassis

FIGURE 3-2 Installing the Mounting Bracket Adapters

FIGURE 3-3 Loosening the Screws at the Top of a Netra CT 810 Server

FIGURE 3-4 Loosening the Screws at the Top of a Netra CT 410 Server

FIGURE 3-5 Loosening the Screws at the Bottom of a Netra CT 810 Server

FIGURE 3-6 Loosening the Screws at the Bottom of a Netra CT 410 Server

FIGURE 3-7 Removing a Netra CT 810 Server From the Chassis

FIGURE 3-8 Removing a Netra CT 410 Server From the Chassis

FIGURE 3-9 Mounting the Netra CT Chassis in a Rack

FIGURE 3-10 DC Grounding Studs

FIGURE 4-1 Unpacking a Netra CT Server

FIGURE 4-2 Installing a Netra CT 810 Server in the Chassis

FIGURE 4-3 Installing a Netra CT 410 Server in the Chassis

FIGURE 4-4 Tightening the Screws at the Top of a Netra CT 810 Server

FIGURE 4-5 Tightening the Screws at the Top of a Netra CT 410 Server

FIGURE 4-6 Tightening the Screws at the Bottom of a Netra CT 810 Server

FIGURE 4-7 Tightening the Screws at the Bottom of a Netra CT 410 Server

FIGURE 5-1 Attaching the Antistatic Wrist Strap

FIGURE 5-2 Supported Locations for RTM Sets in a Netra CT 810 Server (Top View)

FIGURE 5-3 Supported Locations for RTM Sets in a Netra CT 410 Server (Top View)

FIGURE 5-4 Supported and Unsupported Netra CP2140 Host CPU RTM for a Netra CT Server

FIGURE 5-5 Supported Netra CP2500 Host RTM for a Netra CT Server

FIGURE 5-6 Aligning the Board With the Rear Board Cage Cutouts

FIGURE 6-1 Installing the Cable Management Brackets

FIGURE 6-2 Host CPU RTM in a Netra CT 810 Server (Top View)

FIGURE 6-3 Host CPU RTM in a Netra CT 410 Server (Top View)

FIGURE 6-4 Connectors on the Netra CP2140 host RTM

FIGURE 6-5 Supported Netra CP2500 Host RTM

FIGURE 6-6 RJ-45 Ethernet Connector Diagram

FIGURE 6-7 Supported Location for the Alarm RTM in a Netra CT 810 Server (Top View)

FIGURE 6-8 Supported Location for the Alarm RTM in a Netra CT 410 Server (Top View)

FIGURE 6-9 Connectors on the Alarm RTM

FIGURE 6-10 RJ-45 Ethernet Connector Diagram

FIGURE 6-11 COM Ports 1 and 2

FIGURE 6-12 Alarm Port

FIGURE 6-13 Connection Parts

FIGURE 6-14 Stripping the Insulation From the Wire

FIGURE 6-15 Opening the Input Plug Cage Clamp Using the Cage Clamp Operating Lever

FIGURE 6-16 Opening the Cage Clamp Using a Screwdriver

FIGURE 6-17 Assembling the Input Power Cable

FIGURE 6-18 Inserting the Bottom Portion of the Strain Relief Housing

FIGURE 6-19 Routing the Wires Out of the Bottom Portion of the Strain Relief Housing

FIGURE 6-20 Securing the Wires to the Strain Relief Housing

FIGURE 6-21 Assembling the Strain Relief Housing

FIGURE 6-22 Locating the Connectors

FIGURE 6-23 Connecting the Input Power Cable to the Connectors

FIGURE 6-24 Disconnecting the Input Power Cable From the Connector

FIGURE 7-1 Locating the Power Supply Locking Mechanism on the Netra CT 810 Server

FIGURE 7-2 System Status Panel Locations

FIGURE 7-3 System Power Button and System Power LED Locations (Netra CT 810 Server)

FIGURE 7-4 System Power Button and System Power LED Locations (Netra CT 410 Server)

FIGURE A-1 SCSI Connector on the Netra CP2140 Host RTM