nsswitch.conf(4)

NAME | SYNOPSIS | DESCRIPTION | FILES | SUMMARY OF TRUSTED SOLARIS CHANGES | SEE ALSO | NOTES

NAME

nsswitch.conf– configuration file for the name service switch

SYNOPSIS

/etc/nsswitch.conf

DESCRIPTION

The operating system uses a number of databases of information about hosts, ipnodes, users (passwd/shadow), and groups. Data for these can come from a variety of sources: hostnames and host addresses, for example, can be found in /etc/hosts, NIS, NIS+, LDAP, or DNS. Zero or more sources may be used for each database. The sources and their lookup order are specified in the /etc/nsswitch.conf file.

The following databases use the switch file:

Database	Used By
aliases	sendmail(1M)
auth_attr	getauthnam(3SECDB)
automount	automount(1M)
bootparams	rpc.bootparamd(1M)
ethers	ethers(3SOCKET)
group	getgrnam(3C)
hosts	gethostbyname(3NSL). See Interaction with netconfig.
ipnodes	getipnodebyname(3SOCKET)
netgroup	innetgr(3C)
netmasks	ifconfig(1M)
networks	getnetbyname(3SOCKET)
passwd	getpwnam(3C), getspnam(3C), getauusernam(3BSM), getusernam(3SECDB)
printers	lp(1), lpstat(1), cancel(1), lpr(1B), lpq(1B), lprm(1B), in.lpd(1M), lpadmin(1M), lpget(1M), lpset(1M)
prof_attr	getprofname(3SECDB), getexecprof(3SECDB)
project	getprojent(3EXACCT), getdefaultproj(3EXACCT), inproj(3EXACCT), newtask(1), setprojent(3EXACCT)
protocols	getprotobyname(3SOCKET)
publickey	getpublickey(3NSL), secure_rpc(3NSL)
rpc	getrpcbyname(3NSL)
sendmailvars	sendmail(1M)
services	getservbyname(3SOCKET). See Interaction with netconfig.
tnrhdb	tnrhdb(4)
tnrhtp	tnrhtp(4)

The following sources may be used:

Source	Uses
files	/etc/hosts, /etc/passwd, /etc/inet/ipnodes, /etc/shadow
nis	NIS(YP)
nisplus	NIS+
ldap	LDAP
dns	Valid only for hosts; uses the Internet Domain Name Service.
compat	Valid only for passwd and group; implements "+" and "-". See Interaction with +/- syntax.
user	Valid only for printers; implements support for ${HOME}/.printers.
xfn	Valid only for printers; implements support for FNS printer contexts. Provided to allow transition away from FNS printer contexts.

There is an entry in /etc/nsswitch.conf for each database. Typically these entries will be simple, such as "protocols: files" or "networks: files nisplus". However, when multiple sources are specified, it is sometimes necessary to define precisely the circumstances under which each source will be tried. A source can return one of the following codes:

Status	Meaning
SUCCESS	Requested database entry was found.
UNAVAIL	Source is not configured on this system or internal failure.
NOTFOUND	Source responded “no such entry”
TRYAGAIN	Source is busy or not responding, might respond to retries.

For each status code, two actions are possible:

Action	Meaning
continue	Try the next source in the list.
return	Return now.

Additionally, for TRYAGAIN only, the following actions are possible:

Action	Meaning
forever	Retry the current source forever.
n	Retry the current source n more times, where n is an integer between 0 and MAX_INT (that is, 2.14 billion). After n retries has been exhausted, the action will continue to the next source.

The complete syntax of an entry is:

---

<entry>     ::= <database> ":" [<source>
[<criteria>]]*
<criteria>  ::= "[" <criterion>+ "]"
<criterion> ::= <status> "=" <action>
<status>    ::= "success" | "notfound" | "unavail" | "tryagain"

---

For every status except TRYAGAIN, the action syntax is:

---

<action>    ::= "return"  | "continue"

---

For the TRYAGAIN status, the action syntax is:

---

<action>    ::= "return"  | "continue" | "forever" | <n>
<n>         ::= 0...MAX_INT          

---

Each entry occupies a single line in the file. Lines that are blank, or that start with white space, are ignored. Everything on a line following a # character is also ignored; the # character can begin anywhere in a line, to be used to begin comments. The <database> and <source> names are case-sensitive, but <action> and <status> names are case-insensitive.

The library functions contain compiled-in default entries that are used if the appropriate entry in nsswitch.conf is absent or syntactically incorrect.

The default criteria for DNS and the NIS server in “DNS-forwarding mode” (and DNS server not responding or busy) is [SUCCESS=return NOTFOUND=continue UNAVAIL=continue TRYAGAIN=continue].

The default criteria for all other sources is [SUCCESS=return NOTFOUND=continue UNAVAIL=continue TRYAGAIN=forever].

The default, or explicitly specified, criteria are meaningless following the last source in an entry; and they are ignored, since the action is always to return to the caller irrespective of the status code the source returns.

Interaction with netconfig

In order to ensure that they all return consistent results, gethostbyname(3NSL), getipnodebyname(3SOCKET), getservbyname(3SOCKET), and netdir_getbyname(3NSL) functions are all implemented in terms of the same internal library function. This function obtains the system-wide source lookup policy for hosts, ipnodes, and services based on the inet family entries in netconfig(4) and uses the switch entries only if the netconfig entries have a "-" in the last column for nametoaddr libraries. See the NOTES section in gethostbyname(3NSL) and getservbyname(3SOCKET) for details.

Interaction with NIS+ NIS/YP-compatibility Mode

The NIS+ server can be run in "YP-compatibility mode", where it handles NIS (YP) requests as well as NIS+ requests. In this case, the clients get much the same results (except for getspnam(3C)) from the "nis" source as from "nisplus"; however, "nisplus" is recommended instead of "nis".

Interaction with server in DNS-forwarding Mode

The NIS (YP) server can be run in "DNS-forwarding mode", where it forwards lookup requests to DNS for host-names and -addresses that do not exist in its database. In this case, specifying "nis" as a source for "hosts" is sufficient to get DNS lookups; "dns" need not be specified explicitly as a source.

In SunOS 5.3 (Solaris 2.3) and compatible versions, the NIS+ server in "NIS/YP-compatibility mode" can also be run in "DNS-forwarding mode" (see rpc.nisd(1M)). Forwarding is effective only for requests originating from its YP clients; "hosts" policy on these clients should be configured appropriately.

Interaction with Password Aging

When password aging is turned on, only a limited set of possible name services are permitted for the passwd: database in the /etc/nsswitch.conf file:

passwd:

files

passwd:

files nis

passwd:

files nisplus

passwd:

files ldap

passwd:

compat

passwd_compat:

nisplus

passwd_compat:

ldap

Any other settings will cause the passwd(1) command to fail when it attempts to change the password after expiration and will prevent the user from logging in. These are the only permitted settings when password aging has been turned on. Otherwise, you can work around incorrect passwd: lines by using the -r repository argument to the passwd(1) command and using passwd -r repository to override the nsswitch.conf settings and specify in which name service you want to modify your password.

Interaction with +/- syntax

Releases prior to SunOS 5.0 did not have the name service switch but did allow the user some policy control. In /etc/passwd one could have entries of the form +user (include the specified user from NIS passwd.byname), -user (exclude the specified user) and + (include everything, except excluded users, from NIS passwd.byname). The desired behavior was often "everything in the file followed by everything in NIS", expressed by a solitary + at the end of /etc/passwd. The switch provides an alternative for this case ("passwd: files nis") that does not require + entries in /etc/passwd and /etc/shadow (the latter is a new addition to SunOS 5.0, see shadow(4)).

If this is not sufficient, the NIS/YP compatibility source provides full +/- semantics. It reads /etc/passwd for getpwnam(3C) functions and /etc/shadow for getspnam(3C) functions and, if it finds +/- entries, invokes an appropriate source. By default, the source is "nis", but this may be overridden by specifying "nisplus" or “ldap” as the source for the pseudo-database passwd_compat.

Note that for every /etc/passwd entry, there should be a corresponding entry in the /etc/shadow file.

The NIS/YP compatibility source also provides full +/- semantics for group; the relevant pseudo-database is group_compat.

Useful Configurations

The compiled-in default entries for all databases use NIS (YP) as the enterprise level name service and are identical to those in the default configuration of this file:

passwd:

files nis

group:

files nis

hosts:

nis [NOTFOUND=return] files

ipnodes:

nis [NOTFOUND=return] files

networks:

nis [NOTFOUND=return] files

protocols:

nis [NOTFOUND=return] files

rpc:

nis [NOTFOUND=return] files

ethers:

nis [NOTFOUND=return] files

netmasks:

nis [NOTFOUND=return] files

bootparams:

nis [NOTFOUND=return] files

publickey:

nis [NOTFOUND=return] files

netgroup:

nis

automount:

files nis

aliases:

files nis

services:

files nis

sendmailvars:

files

printers:

user files nis nisplus xfn

auth_attr

files nis

prof_attr

files nis

project

files nis

The policy "nis [NOTFOUND=return] files" implies "if nis is UNAVAIL, continue on to files, and if nis returns NOTFOUND, return to the caller; in other words, treat nis as the authoritative source of information and try files only if nis is down. This, and other policies listed in the default configuration above, are identical to the hard-wired policies in SunOS releases prior to 5.0.

If compatibility with the +/- syntax for passwd and group is required, simply modify the entries for passwd and group to:

passwd:

compat

group:

compat

If NIS+ is the enterprise level name service, the default configuration should be modified to use nisplus instead of nis for every database on client machines. The file /etc/nsswitch.nisplus contains a sample configuration that can be copied to /etc/nsswitch.conf to set this policy.

If LDAP is the enterprise level name service, the default configuration should be modified to use ldap instead of nis for every database on client machines. The file /etc/nsswitch.ldap contains a sample configuration that can be copied to /etc/nsswitch.conf to set this policy.

If the use of +/- syntax is desired in conjunction with nisplus, use the following four entries:

passwd:

compat

passwd_compat:

nisplus OR ldap

group:

compat

group_compat:

nisplus OR ldap

In order to get information from the Internet Domain Name Service for hosts that are not listed in the enterprise level name service, NIS+ or LDAP, use the following configuration and set up the /etc/resolv.conf file (see resolv.conf(4) for more details):

hosts:

nisplus dns [NOTFOUND=return] files

or

hosts:

ldap dns [NOTFOUND=return] files

Enumeration - getXXXent()

Many of the databases have enumeration functions: passwd has getpwent(), hosts has gethostent(), and so on. These were reasonable when the only source was files but often make little sense for hierarchically structured sources that contain large numbers of entries, much less for multiple sources. The interfaces are still provided and the implementations strive to provide reasonable results, but the data returned may be incomplete (enumeration for hosts is simply not supported by the dns source), inconsistent (if multiple sources are used), formatted in an unexpected fashion (for a host with a canonical name and three aliases, the nisplus source will return four hostents, and they may not be consecutive), or very expensive (enumerating a passwd database of 5,000 users is probably a bad idea). Furthermore, multiple threads in the same process using the same reentrant enumeration function (getXXXent_r() are supported beginning with SunOS 5.3) share the same enumeration position; if they interleave calls, they will enumerate disjoint subsets of the same database.

In general, the use of the enumeration functions is deprecated. In the case of passwd, shadow, and group, it may sometimes be appropriate to use fgetgrent(), fgetpwent(), and fgetspent() (see getgrnam(3C), getpwnam(3C), and getspnam(3C), respectively), which use only the files source.

FILES

A source named SSS is implemented by a shared object named nss_SSS.so.1 that resides in /usr/lib.

/etc/nsswitch.conf

Configuration file.

/usr/lib/nss_compat.so.1

Implements "compat" source.

/usr/lib/nss_dns.so.1

Implements "dns" source.

/usr/lib/nss_files.so.1

Implements "files" source.

/usr/lib/nss_nis.so.1

Implements "nis" source.

/usr/lib/nss_nisplus.so.1

Implements "nisplus" source.

/usr/lib/nss_ldap.so.1

Implements "ldap" source.

/usr/lib/nss_user.so.1

Implements "user" source.

/usr/lib/nss_xfn.so.1

Implements "xfn" source.

/etc/netconfig

Configuration file for netdir(3NSL) functions that redirects hosts/devices policy to the switch.

/etc/nsswitch.files

Sample configuration file that uses "files" only.

/etc/nsswitch.nis

Sample configuration file that uses "files" and "nis".

/etc/nsswitch.nisplus

Sample configuration file that uses "files" and "nisplus".

/etc/nsswitch.ldap

Sample configuration file that uses "files" and "ldap".

/etc/nsswitch.dns

Sample configuration file that uses “files” and “dns” (but only for hosts:).

SUMMARY OF TRUSTED SOLARIS CHANGES

The following Trusted Solaris network files have been added: tnrhdb and tnrhtp.

In the default Trusted Solaris environment, an administrative role uses the Name Service Switch action in the System_Admin folder in the Application Manager to edit the nsswitch.conf file. This file should not be edited directly.

SEE ALSO

Trusted Solaris 8 HW 12/02 Reference Manual

passwd(1), automount(1M), ifconfig(1M), rpc.bootparamd(1M), rpc.nisd(1M), sendmail(1M), getauusernam(3BSM), getauthnam(3SECDB), resolv.conf(4)

SunOS 5.8 Reference Manual

ldap(1), nis+(1), getgrnam(3C), getnetgrent(3C), getpwnam(3C), getspnam(3C), gethostbyname(3NSL), getpublickey(3NSL), getrpcbyname(3NSL), netdir(3NSL), secure_rpc(3NSL), getexecprof(3SECDB), getprofnam(3SECDB), getusernam(3SECDB), ethers(3SOCKET), getipnodebyname(3SOCKET), getnetbyname(3SOCKET), getprotobyname(3SOCKET), getservbyname(3SOCKET), netconfig(4), project(4), ypfiles(4)

NOTES

Within each process that uses nsswitch.conf, the entire file is read only once; if the file is later changed, the process will continue using the old configuration.

Programs that use the getXXbyYY() functions cannot be linked statically since the implementation of these functions requires dynamic linker functionality to access the shared objects /usr/lib/nss_SSS.so.1 at run time.

The use of both nis and nisplus as sources for the same database is strongly discouraged since both the name services are expected to store similar information and the lookups on the database may yield different results depending on which name service is operational at the time of the request. The same applies for using ldap along with nis or nisplus.

Misspelled names of sources and databases will be treated as legitimate names of (most likely nonexistent) sources and databases.

The following functions do not use the switch: fgetgrent(3C), fgetpwent(3C), fgetspent(3C), getpw(3C), putpwent(3C), shadow(4).

Trusted Solaris 8 HW 12/02  Last Revised 25 Oct 2002

NAME | SYNOPSIS | DESCRIPTION | FILES | SUMMARY OF TRUSTED SOLARIS CHANGES | SEE ALSO | NOTES