How to Verify the Device Drivers Are Properly Installed

After you install the device driver software, follow these steps to verify that the drivers are properly installed:

1. Enter the following command:

   # /etc/LGTOuscsi/lusdebug 1

   You should see the following response:

   debug level was 0; is now 1

2. Enter the following command:

   # /etc/LGTOuscsi/lusdebug 0

   You should see the following response:

   debug level was 1; is now 0

3. Enter the following command:

   # /etc/LGTOuscsi/inquire

   A list of SCSI devices attached to your server, if any, appears on your screen. If you attached your autochanger or silo before you installed the device driver software, the devices should appear in the list.

   For example:

   scsidev@0.0.0:FUJITSU M2263S-512 01 | Direct Access scsidev@0.4.0:Quantum DLT4700 | Sequential Access scsidev@0.4.1:Quantum TZ Media Changer | Changer Device