sjiielm

The sjiielm program tests the SJIIELEM command on SJI-compliant Jukeboxes. The SJIIELEM command tests the Initialize Element Status interface for an autochanger. If the autochanger does not support the element status feature, an error messages is returned. The following example shows the correct usage for the sjiielm program:

sjiielm device-name [{drive | slot | inlt | mt} address number-of-elements]

The device-name option used with the sjiielm program represents any device name that can be used to reach an SJI-compliant autochanger driven by the system, typically in the form b.t.l, where b is the logical SCSI bus, t is the SCSI target, and l is the SCSI lun on that target (for example, scsidev@0.4.0).

The additional options described next are for use with autochangers that support the initilization of a specific range of elements. If the autochanger supports this feature, select one of the following element types:

• drive

• slot

• inlt (import/export element)

• mt (media transport)

  Specify the SJI normalized address (for example, starting from 1) and the number of elements to initilize.