How to Set up TFTP Access for SuSe Provisioning With JET

If you use JET to create your SuSe Linux image server, the TFTP service is automatically configured to support provisioning. You need to create or copy additional directories and files to the TFTP root directory on the boot and install server. The OS distribution should be accessible through NFS for each subnet served from this boot and install server.

Before You Begin

Be sure that the appropriate TFTP server software is installed on the boot and install server.

Step

Copy or create the following directories under the TFTP root directory:

• /tftpboot/pxelinux.0 – You can download the Linux PXE bootstrap file from http://syslinux.zytor.com/pxe.php.

• /tftpboot/pxelinux.cfg/ – This directory contains the PXE configuration files. These files contain parameters specific to each hardware platform and Linux distribution.

  For instructions about how to create the PXE configuration file, see How to Create a PXE Configuration File for SuSe Linux OS Provisioning.

---

Note –

This task uses /tftpboot as an example of the TFTP root directory.

---