Solaris Express 1/06: This feature was undocumented previously.
The following utilities have been enhanced to detect when a specified device is in use:
mkfs and newfs
These enhancements mean that the above utilities might detect some of the following usage scenarios:
Device is part of a ZFS storage pool
Device is a dump or swap device
Mounted file system or an entry for the device exists in the /etc/vfstab file
Device is part of live upgrade configuration
Device is part of a Solaris Volume Manager configuration or Veritas Volume Manager configuration
For example, if you attempt to use the format utility to access an active device, you will see a message similar to the following:
# format . . . Specify disk (enter its number): 1 selecting c0t1d0 [disk formatted] Warning: Current Disk has mounted partitions. /dev/dsk/c0t1d0s0 is currently mounted on /. Please see umount(1M). /dev/dsk/c0t1d0s1 is currently used by swap. Please see swap(1M).
However, these utilities do not detect all scenarios in the same way. For example, you can use the newfs command to create a new file system on a device in a live upgrade configuration. You cannot use the newfs command to create a new file system on a device that is part of a live upgrade configuration if it also has a mounted file system.