Sun Fire V20z and Sun Fire V40z Servers--User Guide
|
![Table Of Contents Table Of Contents](shared/toc01.gif) ![Previous Chapter Previous Chapter](shared/prev01.gif) ![Next Chapter Next Chapter](shared/next01.gif)
|
Introduction to the Sun Fire V20z and Sun Fire V40z Servers
|
This chapter contains an overview of the Sun Fire
V20z and Sun Fire V40z servers.
This chapter contains the following sections:
1.1 Safety Guidelines
You can safely connect the Sun Fire V20z and Sun Fire V40z servers to an IT Power System.
The use of the black-on-yellow “exclamation-point-in-a-triangle” symbol on the product indicates a reference to the following important safety information, concerning National Deviations for Finland, Norway, and Sweden:
- English: The earthed-style attachment plug on the power-supply cord requires the socket outlet to be an earthing type.
- Finnish: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
- Norwegian: Apparatet må tilkoples jordet stikkontakt.
- Swedish: Apparaten skall anslutas till jordat uttag.
1.2 User Documentation
For the most up-to-date user documentation, for both the Sun Fire V20z and Sun Fire V40z servers, visit the following web site:
http://www.sun.com/products-n-solutions/hardware/docs/Servers/x64_servers/v20z_v40z/index.html
To verify whether a document on the site is more recent than the document that you have, refer to the final two digits (the dash-roll) of the part number for that document or review the release date of the document.
Note - A document explaining the differences among the released versions of the Sun Fire V20z and Sun Fire V40z servers is also available at this web site. Refer to part number (PN) 817-7185.
|
1.3 Overview of the Sun Fire V20z Server
The Sun Fire V20z is an AMD Opteron
processor-based enterprise-class server. It is a 1 rack unit (1U) 2-processor (2P) system. The Sun Fire V20z provides performance and value to an enterprise environment, offering significantly better performance than current 32-bit x86-based solutions. The balanced server design maximizes overall performance through industry-leading I/O options, and delivers compelling real-world workload performance.
The Sun Fire V20z server includes an embedded service processor (SP), flash memory, RAM, a separate Ethernet interface, and server-management software. It comes equipped with server-management tools for greater control and minimum total cost of ownership. You can use the command-line interface or SNMP integration with third-party frameworks to configure and manage the platform with the SP. The dedicated SP provides complete operating-system independence and maximum availability of server management.
1.3.1 Applications
The Sun Fire V20z server is ideal for the following applications:
- Web or application hosting
- High-performance compute clusters
- Remote server installations
- Database workloads
- Corporate data centers
1.3.2 Sun Fire V20z Features
TABLE 1-1 lists the main features of the Sun Fire V20z server.
TABLE 1-1 Sun Fire V20z Server Features
Component
|
Description
|
CPU
|
2 AMD Opteron processors
64-bit x86 architecture
|
Memory
|
512 MB to 16 GB ECC, registered DDR
(8 slots, 3.05 cm max. height)
|
Hard disk drive(s)
|
1 or 2 U320 SCSI HDD(s)
|
RAID options
|
Integrated mirroring only (see Section D.1.2, Integrated Mirroring)
|
SCSI controller
|
Embedded U320 controller with potential mirroring support
|
Network I/O
|
Dual embedded Gigabit Ethernet
|
PCI I/O
|
2 PCI-X expansion slots:
- 1 full-length 66-MHz/64-bit or 133-MHz/64-bit slot
- 1 half-length 66-MHz/64-bit slot
|
Other I/O
|
Internal CD-ROM (or DVD-ROM) and diskette drive
Embedded SVGA video, keyboard, and mouse connectors
|
Management service processor
|
PowerPC processor running embedded Linux and SSL encryption for secure management, and two dedicated 10/100-Mbps Ethernet ports
|
Table lists the features of the Sun Fire V20z server. 1.3.3 Sun Fire V20z Server Hardware System Orientation
Before performing any service procedures, become familiar with the physical orientation and features of your Sun Fire V20z server.
1.3.3.1 Sun Fire V20z Front and Back Panels
FIGURE 1-1 shows the front panel of the Sun Fire V20z server.
FIGURE 1-1 Front Panel of the Sun Fire V20z Server
Refer to Section 1.5.1.2, Operator Panel for more information about the operator panel.
FIGURE 1-2 shows the back panel of the Sun Fire V20z server.
FIGURE 1-2 Back Panel of the Sun Fire V20z Server
Ethernet Port Labeling
It is important to note the labeling of the Ethernet ports on the back panel of the Sun Fire V20z server. As shown on the far right side of the server illustrated in FIGURE 1-2, interfaces eth1 and eth0 are labeled as “1” on the upper port and “0” on the bottom port, respectively.
PCI Slot Labeling
The PCI slots are labeled on the server back panel as PCI O (next to the power supply) and PCI 1 (between the SP and platform Ethernet ports). See FIGURE 1-2.
- The slot on the motherboard that corresponds to PCI 0 is identified by the silk-screen label “Slot 2 133MHz.”
- The slot on the motherboard that corresponds to PCI 1 is identified by the silk-screen label “Slot 1 66MHz.”
1.3.3.2 Sun Fire V20z System Components
FIGURE 1-3 shows the locations of the components inside the Sun Fire V20z chassis.
FIGURE 1-3 Location of System Components in the Sun Fire V20z Server
[ D ]
1.4 Overview of the Sun Fire V40z Server
The Sun Fire V40z server is an AMD Opteron processor-based enterprise-class server. It is a 3 rack unit (3U) 4-processor (4P) system. The Sun Fire V40z server provides performance and value to an enterprise environment, offering significantly better performance than current solutions. The AMD Opteron processor implements the x86 64-bit architecture. In addition, it delivers significant memory capacity and bandwidth, with twice the memory capacity and up to three times the memory bandwidth of existing 32-bit x86 servers.
The Sun Fire V40z server includes an embedded service processor (SP), flash memory, RAM, a separate Ethernet interface, shadow password support, and server-management software. It comes equipped with server-management tools for greater control and minimum total cost of ownership. You can use the command-line interface or SNMP integration with third-party frameworks to configure and manage the platform with the SP. The dedicated SP provides complete operating-system independence and maximum availability of server management.
The Sun Fire V40z supports dual-core CPUs. Dual-core processors double the server’s processing capability without increasing the power and cooling expenses of the server.
1.4.1 Applications
The Sun Fire V40z server is ideal for the following applications:
- Web or application hosting
- High-performance compute clusters
- Remote server installations
- Database workloads
- Corporate data centers
1.4.2 Sun Fire V40z Features
TABLE 1-2 lists the main features of the Sun Fire V40z server.
TABLE 1-2 Sun Fire V40z Server Features
Component
|
Description
|
CPU
|
4 AMD Opteron processors
64-bit x86 architecture
|
Memory
|
512 MB to 64 GB ECC, registered DDR
(16 slots, 3.05 cm max. height)
|
Hard disk drive(s)
|
Up to six U320 SCSI HDD(s).
Note: The server has five HDD bays and one DVD-ROM/Diskette assembly. You can remove the DVD-ROM/Diskette assembly and install a sixth HDD in this position (a hardware adapter is required).
|
RAID options
|
Integrated mirroring only (see Section D.1.2, Integrated Mirroring)
|
SCSI controller
|
Embedded U320 controller with potential mirroring support
|
Network I/O
|
Dual embedded Gigabit Ethernet
|
PCI I/O
|
7 PCI-X expansion slots:
- 4 full-length, 133-MHz/64-bit, vertical slots
- 1 full-length, 100-MHz/64-bit, vertical slot
- 1 half-length, 100-MHz/64-bit, vertical slot
- 1 half-length, 66-MHz/64-bit, horizontal slot (with riser)
|
Other I/O
|
Internal DVD-ROM and diskette drive
Embedded SVGA video, keyboard and mouse connectors
|
Management service processor
|
PowerPC processor running embedded Linux and SSL encryption for secure management, and two dedicated 10/100-Mbps Ethernet ports
|
Table presents the features of the Sun Fire V40z server. 1.4.3 Sun Fire V40z Server Hardware System Orientation
Before performing any service procedures, become familiar with the physical orientation and features of your Sun Fire V40z server.
1.4.3.1 Sun Fire V40z Front and Back Panels
FIGURE 1-4 shows the front panel of the Sun Fire V40z server.
FIGURE 1-4 Front Panel of the Sun Fire V40z Server
Refer to Section 1.5.1.2, Operator Panel for more information about the operator panel.
FIGURE 1-5 shows the back panel of the Sun Fire V40z server.
FIGURE 1-5 Back Panel of the Sun Fire V40z Server
Ethernet Port Labeling
It is important to note the labeling of the Ethernet ports on the back panel of the Sun Fire V40z server. Referring to the platform Gigabit Ethernet ports at the right edge of the chassis (see FIGURE 1-5), the lower Ethernet interface is eth0 and the upper interface is eth1.
1.4.3.2 Sun Fire V40z System Components
FIGURE 1-6 shows the locations of the components inside the Sun Fire V40z chassis.
FIGURE 1-6 Sun Fire V40z System Components
1.5 Shared Features of the Sun Fire V20z and Sun Fire V40z Servers1.5.1 Server Management
Strong server-management capabilities are crucial to maintaining mission-critical servers. Advance notification of problems and rapid diagnosis and correction are critical functions within an environment in which a few servers bear most of the workload. These servers and their extensive server-management capabilities lower costs by reducing failure and potentially eliminating hands-on management.
1.5.1.1 Service Processor
These servers include a dedicated service processor (SP) for complete operating-system independence and maximum availability of server management. The SP is an embedded PowerPC that provides the following:
- Environmental monitoring of the platform (such as temperatures, voltages, fan speeds and panel switches)
- Alert messages when problems occur
- Remote control of server operations (boot, shutdown and reboot of the server’s operating system, turning the server’s power on and off, stopping the server’s boot process in BIOS, and upgrading the BIOS)
The SP runs an embedded version of Linux software, and all the server-management functions are developed as standard Linux applications. Its sole purpose is to support server management; therefore, the full functionality of the operating system is not available in the SP. Many familiar applications, such as FTP and Telnet, are not provided as they are not required to support the server-management feature set.
1.5.1.2 Operator Panel
You can use the operator panel to configure network settings for the service processor.
- FIGURE 1-1 shows the operator-panel location on the Sun Fire V20z front panel.
- FIGURE 1-4 shows the operator-panel location on the Sun Fire V40z front panel.
The drivers for the server must be installed to access the menu options displayed on the operator panel. Some operator-panel menus are only functional under these conditions:
- An external file system is configured with the Network Share Volume (NSV).
- The SP update server from the NSV machine is available.
- The NSV machine has Java
runtime environment 1.4.2 (or later) installed on it.
The liquid-crystal display (LCD) panel on the operator panel displays menu options with Menu: appearing in the first line and the menu option in the second line. When no menu option is available, the first line displays SP information, such as the IP address, and the second line provides platform information. For example:
123.45.67.89 OS running
TABLE 1-3 shows the operator-panel buttons that are used to navigate through the menu options.
TABLE 1-3 Operator-Panel Buttons
Buttons
|
Function
|
|
Back/No
|
|
Select
|
|
Forward/Yes
|
|
Enter
|
|
Cancel
|
The first column of the table contains icons showing the buttons that correspond to the functions of the operator panel.
The Back/No and Forward/Yes buttons automatically scroll, repeating the action as long as the button is pressed. After the button is pressed a few seconds, auto scrolling begins and rapidly increments or decrements the value.
If a menu or data-entry screen displays for more than 30 seconds with no action taken, the menu or data entry is cancelled and the display returns to the idle/background state.
TABLE 1-4 lists the operations you can perform from the operator panel.
TABLE 1-4 Operator-Panel Menu Options
Menu
|
Menu Options
|
Description
|
Server
|
Shutdown Server
|
Signals the server operating system (OS) to shut down and power off.
To force the power off in the case in which the OS hangs, the operator must press and hold the Power button for four seconds.
|
Reboot Server
|
Signals the server OS to shut down and reboot.
|
Show DIMM Errs
|
Displays memory-module errors.
|
Clear DIMM Errs
|
Clears memory-module errors.
(For more information, refer to the chapter on “DIMM Faults” in the Sun Fire V20z and Sun Fire V40z Servers-- Troubleshooting Techniques and Diagnostics Guide, 817-7184.)
|
Display Port 80
|
Displays the last ten port 80 codes (in hex, 5 per line). Press any button to clear the display. The display automatically clears after 30 seconds.
This feature only works in BIOS booting state; to see all the POST codes, run the subcommand sp get port80 -m.
|
SP
|
Set SP IP Information
|
Configures the SP network using DHCP or a static IP address.
(For more information, refer to the Sun Fire V20z and Sun Fire V40z Servers--Installation Guide, 817-5246.)
|
Autoconfigure
|
Propagates SP configuration information from one SP to one or more others.
(For more information, refer to the Sun Fire V20z and Sun Fire V40z Servers--Server Management Guide, 817-5249.)
|
Update SP Flash
|
Updates SP software.
(For more information, refer to the Sun Fire V20z and Sun Fire V40z Servers--Server Management Guide, 817-5249.)
|
|
Dump SP
|
Invokes the Troubleshooting Dump Utility (TDU), which captures the following information and either sends it to stdout or stores it in an output file:
- System state table (SST)
- Hardware and software component versions
- Machine check register values
- CPU trace buffers
- CPU configuration space registers (CSR)
- Event log file
- Last good configuration (LGC)
By default, the TDU data is redirected to stdout.
If there is an NFS-mounted directory, the log is placed on a mounted NFS filesystem, with the following path and file name: /logs/sp hostname/tdulog.tar.
Note: You can also invoke the TDU running the subcommand sp get tdulog.
|
Use Defaults
|
Restores SP settings to the default factory configuration.
Note: All current data (users, network configuration, SSH, and events) and IPMI settings are lost, and the SP is rebooted.
|
Set SP IP Info
|
Configures the SP network using DHCP or a static IP address.
(For more information, refer to Chapter 2 in the Sun Fire V20z and Sun Fire V40z Servers--Installation Guide, 817-5246.)
|
Reboot SP
|
Forces the SP to shut down and reboot.
Note: The platform OS is not affected.
|
Config Console
|
Allows you to configure the rear-panel serial port to be SP or platform.
|
Display Sensors
|
Displays current sensor readings for each sensor type
- The Left and Right arrow buttons display sensor types.
- The Select button displays the sensor readings in alphabetical order by unique ID.
- For LEDs, the Select button toggles the state of the LED on or off.
|
|
Display HW Inv
|
To use this option:
- The Left and Right arrow buttons display inventory items.
- The Select button displays the fields that are available for each item.
- For LEDs, the Select button toggles the state of the LED on or off.
The individual fields reported are:
Note: Blank fields are skipped.
- Name
- Attribute
- OEM
- Serial number
- Part number
- Revision
- Assembly number
- Assembly revision
- Firmware ID
- Firmware revision
- Software ID
- Software revision
- Date of manufacture
|
Display SW Inv
|
To use this option:
- The Left and Right arrow buttons display inventory items.
- The Select button displays the fields that are available for each item.
- Also displayed is the version and date of installation.
|
Panel
|
Use SP Hostname
|
Displays the networking host name of the SP in the top line instead of its numeric IP address.
|
Name for LCD
|
Displays a custom name for the SP in the LCD.
(For more information, refer to the Sun Fire V20z and Sun Fire V40z Servers--Installation Guide, 817-5246.)
|
Clear LCD Name
|
Removes the user-specified name for the SP. Either the host name or the IP address displays in the first line.
|
Rotate IP/Name
|
The first line of the LCD alternates every five seconds. For example, the custom name for the LCD or host name displays, then the IP address, then back, and so on every five seconds.
If you set the Name for LCD option, it displays in the top line. If you do not set the Name for LCD option and you do specify the Use SP Hostname option, the host name displays in the top line. If you specify neither the Name for LCD nor the Use SP Hostname options, the numeric IP address is displayed.
|
Table presents the main menu items on the operator panel and the options under each menu item, and descriptions. The main menu items and options include: Server (Shutdown Server, Reboot Server, Show DIMM Errs, CLear DIMM Errs, Display Port 80); Server Processor (Set SP IP Information, Autoconfigure, Update SP Flash, Dump SP, Use Default, Set SP IP Info, Reboot SP, Config Console, Display Sensors, Display HW Inv, Display SW Inv); Panel (Use SP Hostname, Name for LCD, Clear LCD Name, Rotate IP/Name). 1.5.1.3 Front and Back Panel LEDs
TABLE 1-5 describes the functions of the LEDs on the front panel of the server and TABLE 1-6 describes the functions of the LEDs on the back panel.
- Refer to FIGURE 1-1 and FIGURE 1-2 for the locations of these LEDs on the Sun Fire V20z server.
- Refer to FIGURE 1-4 and FIGURE 1-5 for the locations of these LEDs on the Sun Fire V40z server.
TABLE 1-5 Front-Panel LED Functions
LED
|
Description
|
Platform Power
|
This LED is lit when the platform power is on.
|
System Fault
|
This LED blinks when a severe system fault, such as an over-voltage condition or an upper temperature limit, is detected.
Refer to “System-Fault Events” in the Sun Fire V20z and Sun Fire V40z Servers-- Troubleshooting Techniques and Diagnostics Guide, 817-7184.
|
Locate
|
This LED is lit when you press the Locate button on either the front or the back of the server. This LED helps you to identify which system in the rack you are working on in a rack full of servers.
You can also turn on this LED remotely through SP commands (refer to the Sun Fire V20z and Sun Fire V40z Servers--Server Management Guide, 817-5249).
|
Table describes the functions of the LEDs on the front panel of the server.
TABLE 1-6 Back-Panel LED Functions
LED
|
Description
|
AC Power Indicator
|
This LED is lit when the AC power is on.
|
Locate
|
This LED is lit when you press the Locate button on either the front or the back of the server. This LED helps you to identify which system in the rack you are working on in a rack full of servers.
|
Table describes the contents of the accessory kits for the Sun Fire V20z and Sun Fire V40z servers.
1.6 Additional Options and Customer-Replaceable Components
Sun offers additional options as well as customer-replaceable components (CRUs) for the servers. The components for both the Sun Fire V20z and Sun Fire V40z servers are shown in TABLE 1-7.
To order these parts, contact your local Sun sales representative. You might have a part that is replaceable under warranty. For specific details regarding your warranty, refer to:
http://www.sun.com/service/support/warranty/index.html
TABLE 1-7 Additional Options and Customer-Replaceable Components for the Sun Fire V20z and Sun Fire V40z Servers
Sun Fire V20z
|
Sun Fire V40z
|
Component
|
Additional Options
|
Customer-Replaceable Components
|
|
|
Single Core CPU
|
X
|
|
- Opteron 242, 1.6 GHz, C0 Stepping
|
595-7376-xx
|
F370-6695-xx
|
X
|
|
- Opteron 244, 1.8 GHz, C0 Stepping
|
595-7336-xx
|
F370-6670-xx
|
X
|
|
- Opteron 248, 2.2 GHz, C0 Stepping
|
595-7337-xx
|
F370-6672-xx
|
X
|
|
- Opteron 244, 1.8 GHz, CG Stepping
|
594-0368-xx
|
F370-6783-xx
|
X
|
|
- Opteron 248, 2.2 GHz, CG Stepping
|
594-0369-xx
|
F370-6785-xx
|
X
|
|
- Opteron 250, 2.4 GHz, CG Stepping
|
595-7579-xx
|
F370-6786-xx
|
X
|
|
- Opteron 244, 1.8 GHz, E Stepping
|
594-0660-xx
|
F370-7710-xx
|
X
|
|
- Opteron 248, 2.2 GHz, E Stepping
|
594-0661-xx
|
F370-7711-xx
|
X
|
|
- Opteron 250, 2.4 GHz, E Stepping
|
594-0662-xx
|
F370-7712-xx
|
X
|
|
- Opteron 252, 2.6 GHz, E Stepping
|
594-0371-xx
|
F370-7272-xx
|
|
X
|
- Opteron 844, 1.8 GHz, CG Stepping
|
595-7482-xx
|
F370-6902-xx
|
|
X
|
- Opteron 848, 2.2 GHz, CG Stepping
|
595-7483-xx
|
F370-6904-xx
|
|
X
|
- Opteron 850, 2.4 GHz, CG Stepping
|
595-7577-xx
|
F370-6939-xx
|
|
X
|
- Opteron 848, 2.2 GHz, E4 Stepping
|
594-1099-xx
|
F370-7704-xx
|
|
X
|
- Opteron 850, 2.4 GHz, E4 Stepping
|
594-1100-xx
|
F370-7705-xx
|
|
X
|
- Opteron 852, 2.6 GHz, E4 Stepping
|
594-1101-xx
|
F370-7706-xx
|
|
X
|
- Opteron 854, 2.8 GHz, E4 Stepping
|
594-2001-xx
|
F370-7961-xx
|
|
|
Dual Core CPU
|
X
|
|
- Opteron DC 270, 2.0 GHz, E Stepping
|
594-1663-xx
|
F370-7799-xx
|
X
|
|
- Opteron DC 275, 2.2 GHz, E Stepping
|
594-1664-xx
|
F370-7800-xx
|
|
X
|
- Opteron DC 870, 2.0 GHz, E Stepping
|
594-1623-xx
|
F370-7796-xx
|
|
X
|
- Opteron DC 875, 2.2 GHz, E Stepping
|
594-1622-xx
|
F370-7797-xx
|
|
X
|
- Opteron DC 880, 2.4 GHz, E6 Stepping
|
594-2381-xx
|
F371-0291-xx
|
|
|
Memory
|
X
|
X
|
- 1 GB ECC DDR/333 (2 x 512 MB DIMMs)
|
595-7339-xx
|
F370-6643-xx
|
X
|
X
|
- 2 GB ECC DDR/333 (2 x 1 GB DIMMs)
|
595-7340-xx
|
F370-6644-xx
|
X
|
|
- 4 GB ECC DDR/333 (2 x 2 GB DIMMs)
|
595-7341-xx
|
F370-6645-xx
|
|
X
|
- 4 GB ECC DDR/333 (2 x 2 GB DIMMs)
|
595-7599-xx
|
F370-7063-xx
|
X
|
X
|
- 1 GB ECC DDR/400 (2 x 512 MB DIMMs)
|
594-0663-xx
|
F540-6427-xx
|
X
|
X
|
- 2 GB ECC DDR/400 (2 x 1 GB DIMMs)
|
594-0664-xx
|
F540-6428-xx
|
X
|
X
|
- 4 GB ECC DDR/400 (2 x 2 GB DIMMs)
|
594-0665-xx
|
F540-6429-xx
|
|
|
Hard Disk Drives (HDDs) and SCSI Backplanes
|
X
|
|
- 36 GB, Ultra 320 SCSI, 10K rpm
|
595-7342-xx
|
F370-6655-xx
|
X
|
X
|
- 73 GB, Ultra 320 SCSI, 10K rpm
|
595-7344-xx
|
F370-6689-xx
|
X
|
X
|
- 73 GB, Ultra 320 SCSI, 15K rpm
|
595-7578-xx
|
F370-6941-xx
|
X
|
X
|
- 146 GB, Ultra 320 SCSI, 10K rpm
|
595-7484-xx
|
F370-6905-xx
|
X
|
X
|
- 300 GB, Ultra 320 SCSI, 10K rpm
|
594-0669-xx
|
F370-7749-xx
|
X
|
|
|
N/A
|
F370-6647-xx
|
|
X
|
|
N/A
|
F370-6926-xx
|
|
|
PCI Option Cards and Riser Cards
|
X
|
X
|
Ultra SCSI 320 dual port PCI-X card, full length card
|
595-7353-xx
|
F370-6682-xx
|
X
|
X
|
FC-AL 2-Gb/s PCI-X card, low profile 133-MHz card
|
595-7377-xx
|
F370-6697-xx
|
X
|
X
|
Single Gigabit Ethernet PCI-X NIC, low-profile 66-MHz or 133-MHz card
|
595-7359-xx
|
F370-6685-xx
|
X
|
X
|
Dual Gigabit Ethernet PCI-X NIC, low-profile 66-MHz or 133-MHz card
|
595-7360-xx
|
F370-6687-xx
|
X
|
X
|
Quad Gigabit Ethernet PCI-X NIC, low-profile 66-MHz or 133-MHz card
|
595-7361-xx
|
F370-6688-xx
|
X
|
X
|
PCI-X RAID LSI MegaRAID with battery backup
|
594-0668-xx
|
F370-7748-xx
|
X
|
X
|
InfiniBand PCI-X HCA card
|
595-7580-xx
|
F370-6943-xx
|
X
|
|
PCI riser card
|
N/A
|
F370-6679-xx
|
|
X
|
PCI riser card
|
N/A
|
F370-6920-xx
|
|
|
Voltage-Regulator Modules (VRMs)
|
X
|
X
|
CPU Voltage-Regulator Module (VRM)
|
N/A
|
F370-7746-xx
F370-6680-xx
|
X
|
X
|
Memory Voltage-Regulator Module (VRM)
|
N/A
|
F370-7747-xx
F370-6646-xx
|
|
|
Optical Drives
|
X
|
|
CD-ROM/Diskette combo unit
|
595-7347-xx
|
F370-6637-xx
|
X
|
|
DVD-ROM/Diskette combo unit
|
595-7348-xx
|
F370-6656-xx
|
|
X
|
DVD-ROM/Diskette combo unit
|
596-7485-xx
|
F370-6906-xx
|
|
|
Power Supplies
|
X
|
|
Power supply
|
N/A
|
F370-6636-xx
|
|
X
|
Power supply (2nd power supply)
|
595-7500-xx
|
F370-6916-xx
|
|
X
|
Power-supply cage assembly
|
N/A
|
F370-6921-xx
|
|
|
Cooling Fans
|
X
|
|
Cooling fan (individual)
|
N/A
|
F370-6639-xx
|
|
X
|
Cooling fan (individual)
|
N/A
|
F370-6922-xx
|
|
X
|
Fan-cage assembly, front (holds four fans)
|
N/A
|
F370-7803-xx
|
|
X
|
Fan-cage assembly, rear (holds eight fans)
|
N/A
|
F370-6924-xx
|
|
|
Miscellaneous
|
X
|
|
I/O board
|
N/A
|
F370-6678-xx
|
X
|
|
Operator panel
|
N/A
|
F370-6681-xx
|
|
X
|
Operator-panel assembly
|
N/A
|
F370-6925-xx
|
X
|
|
System Cables Kit
|
N/A
|
F370-6676-xx
|
|
X
|
System Cables Kit
|
N/A
|
F370-6584-xx
|
|
X
|
Secondary Planer CPU card
|
N/A
|
F370-6927-xx
|
|
X
|
Secondary Planer CPU card
|
N/A
|
F370-7778-xx
|
X
|
X
|
28" Rail rackmount kit
|
595-7378-xx
|
N/A
|
X
|
X
|
30" Rail rackmount kit
|
594-2380-xx
|
N/A
|
|
X
|
Cable management arm (for rackmounting)
|
595-7487-xx
|
N/A
|
Table describes additional options and customer-replaceable components for the Sun Fire V20z and Sun Fire V40z servers.
1.7 Field-Replacement Units
Field-replacement units (FRUs) are components that should be replaced by qualified technicians only.
The FRUs available for the Sun Fire V20z and Sun Fire V40z servers are shown in TABLE 1-8.
To order these parts, contact your local Sun sales representative. You might have a part that is replaceable under warranty. For specific details regarding your warranty, refer to:
http://www.sun.com/service/support/warranty/index.html
TABLE 1-8 Field-Replacement Units for the Sun Fire V20z and Sun Fire V40z Servers
Component
|
Field-Replaceable Components
|
Sun Fire V20z Server-- Super FRU (chassis swap)
|
F380-0979-xx
F380-1168-xx
F380-1194-xx
|
Sun Fire V40z Server-- Super FRU (chassis swap)
|
F380-1010-xx
F380-1206-xx
|
Table describes field-replaceable units for the Sun Fire V20z and Sun Fire V40z servers.