Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Installation Guide
819-1155-17
Contents |
1. Setting Up the Server Hardware
Installing the Server Into a Rack With Optional Slide Rails
Disassembling the Slide Rails Before Installation
Installing the Mounting Brackets Onto the Server
Attaching the Slide-Rail Assemblies to the Rack
Installing the Server Into the Slide Rail Assemblies
Installing the Cable Management Assembly
Verifying Operation of the Slide Rails and CMA
Powering On and Off the Server
Applying Standby Power for Initial Service Processor Configuration
2. Setting Up the Server Software
Introduction to the Integrated Lights Out Manager
Connecting to the ILOM Service Processor
Connecting to ILOM Using a Serial Connection
Connecting to ILOM Using an Ethernet Connection
Configuring ILOM Ethernet Settings Using DHCP
Configuring ILOM Using Static Ethernet Settings
Setting Up Platform Operating System and Driver Software
3. Configuring the Preinstalled Solaris 10 Operating System
Configuring the Preinstalled Solaris 10 Operating System
To Connect to the Server Using the Service Processor’s IP Address
To Connect to the Server Using a Terminal Program
Downloading Solaris 10 OS Software
Copyright © 2008 Sun Microsystems, Inc. All Rights Reserved.