| Sun Fire X4100 and Sun Fire X4200 Servers Release Notes For Software Release 1.2.1 |     |
| Sun Fire X4100 and Sun Fire X4200 Servers Release Notes For Software Release 1.2.1 | |
Sun Fire X4100 and Sun Fire X4200 Servers Release Notes For Software Release 1.2.1
819-4344-12
|
Contents |
Flash Upgrading Your Server to Release 1.2.1
How to Flash Upgrade Your Server to Release 1.2.1
Summary of ILOM SP/BIOS Flash Upgrade Steps
How to Determine The Firmware Version of Your Server
Determining the Firmware Version Using the CLI Through the Management Ethernet Port
Determining the Firmware Version Using the CLI Through the Serial Port
Determining the Firmware Version Using the Web GUI
Summary Pre-Flash Script Procedure
Detailed Pre-Flash Script Procedures
Determining Whether the Pre-Flash Script Has Been Applied
Locating ILOM Service Processor Addresses
Special Considerations Regarding the ILOM Firmware Release 1.0.5a Update
LSI Firmware fw1.10.00-bios6.06.06A Is Required For Release 1.2.1
Wrong Firmware Version Number in Firmware (6466318)
Flash Upgrades From SP Build 6464 or 10644 Fail With Bad /conf Partition (6415975)
FRU Information Appears Empty After Updating the ILOM Firmware and the BIOS (6406138)
If Flash Upgrade to Release 1.2.1 Fails, No Error Messages Are Displayed (6449094)
New FRU Data Does Not Display Properly on Older SW Releases 1.0 and 1.1 (6475381)
Servers With SW 1.2.1 factory-Installed Do Not Display Correct FRU Data
Upgrades From SW 1.0 Must Upgrade to SW 1.1 Before Upgrading to SW 1.2 or Later (6476901)
Considerations When Starting the Update On Systems With ILOM Versions Earlier than 6464
Recovering From a Failed Flash Update
Upgrading LSI Firmware and BIOS
| Sun Fire X4100 and Sun Fire X4200 Servers Release Notes For Software Release 1.2.1 | 819-4344-12 | |
Copyright © 2006, Sun Microsystems, Inc. All Rights Reserved.