C H A P T E R 5 |
Managing System Components |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide (820-6410) |
||
Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide (820-6412) |
||
The ILOM 3.0 Documentation Collection is available at: http://docs.sun.com/app/docs/prod/int.lights.mgr30#hic |
Prior to performing the procedures in this section, you should ensure that the following requirement is met.
View and Change Component Information |
Follow these steps to view and change component information:
1. Log in to the ILOM SP web interface or the CMM ILOM web interface.
2. Select System Information --> Components.
The Component Management page appears.
3. When a component is faulted, a radio button will appear to the left of the component name. Click on the radio button to check the fault status. If a radio button does not appear next to a component’s name, click on the name of a component to verify the status.
A dialog box appears with information about the selected component. See the following figure.
Prepare to Remove a Component |
Follow these steps to prepare to remove a component:
1. Log in to the ILOM SP web interface or the CMM ILOM web interface.
2. Select System Information --> Components.
The Component Management page appears.
3. Select the radio button next to the component that you want to remove.
Components without radio buttons cannot be removed.
4. From the Actions drop-down list, select Prepare to Remove.
Return a Component to Service |
Follow these steps to return a component to service:
1. Log in to the ILOM SP web interface or the CMM ILOM web interface.
2. Select System Information --> Components.
The Component Management page appears.
3. Select the radio button next to the component you want to return to service.
4. From the Actions drop-down list, select Return to Service.
Enable and Disable Components |
Follow these steps to enable and disable components:
1. Log in to the ILOM SP web interface or the CMM ILOM web interface.
2. Select System Information --> Components.
The Component Management page appears.
3. Select the radio button next to the component you want to enable or disable.
4. From the Actions drop-down list, select either Enable or Disable.
The component is enabled or disabled, depending on your selection.
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.