Oracle Integrated Lights Out Manager (ILOM) CMM Administration Guide for Sun Blade 6000 and 6048 Modular Systems
Administration Guide for Sun Blade 6000 and Sun Blade 6048 Modular Systems
820-0052-15
Contents |
Connect to the CMM ILOM Using a Serial Connection
View and Set IPv4 Network Address
View and Set Dual-Stack IPv4 and IPv6 Network Address
Test IPv4 or IPv6 Network Configuration
Log In to CMM ILOM Using a Network Connection
Log In to ILOM 3.0 Using the Web Interface
Log In to ILOM 3.0 Using the CLI
Enable Ethernet Ports Using the Web Interface
Enable Ethernet Ports Using the CLI
Changing the Blade SP CLI Prompt
Reset the Blade SP CLI Prompt to the Default
Updating the CMM ILOM Firmware
Determining Your Current Firmware Version
Determine the Firmware Version Using the Web Interface
Determine the Firmware Version Using the Management Ethernet Port CLI
Determine the Firmware Version Using the Serial Management Port CLI
Update ILOM Firmware Using the Web Interface
Update ILOM Firmware Using the CLI
Update NEM Firmware Using the CLI
Update NEM Firmware Using the Web Interface
Updating Chassis Component Firmware Using the CMM
Update Firmware Using the Web Interface
Reset the CMM Using the Web Interface
Light Load Efficiency Mode (LLEM)
Setting LLEM Using the Web Interface
Enable or Disable LLEM Using the Web Interface
Enable or Disable Redundant Mode Using the Web Interface
Enable or Disable LLEM Using the CLI
Enable Redundant Mode Using the CLI
Enable Non-Redundant Mode Using the CLI
Set the Power Supply Fan Speed Using the Web Interface
Set the Power Supply Fan Speed Using the CLI
Disabling the Power Management Policy
Disable Power Management Policy Using the Web Interface
Disable Power Management Policy Using the CLI
ILOM 3.0 for Specific Sun Blade 6048 Cases
ILOM Behavior With Two Power Cord Configuration
Configure the CMM for Two Power Cords
ILOM Readings for Specific Power Supply States
AC Cables Are Disconnected, Then Are Reconnected
Introduction to the Sun Blade Zone Manager
Sun Blade Zone Manager Overview
Accessing Zone Manager Using the Web Interface
Accessing Zone Manager Using the CLI
Assigning Storage to a Server Blade
Assigning a Server Blade to Storage
Supported Hardware and Firmware Configurations
Additional System Requirements
Accessing the Sun Blade Zone Manager
Access and Enable the Sun Blade Zone Manager Using the Web Interface
Access and Enable the Sun Blade Zone Manager Using the CLI
Creating the Chassis Storage Access Configuration
Creating the Chassis Storage Access Configuration Using Quick Setup
Use Quick Setup to Create an Initial Chassis Storage Configuration Using the Web Interface
Creating the Chassis Storage Access Configuration Using Detailed Setup
Use Detailed Setup to Create the Chassis Storage Configuration Using the Web Interface
Creating a Chassis Storage Configuration Using the CLI
Create a Chassis Storage Configuration Using the CLI
Viewing or Modifying the Chassis Storage Access Configuration
View and Modify the Chassis Storage Configuration Using the Web Interface
View and Modify the Chassis Storage Configuration Using the CLI
Assign Multiple Server Blades to a Storage Device Using the Web Interface
View the Storage Access Configuration Table Using the Web Interface
Saving the Chassis Storage Access Configuration
Important Considerations About Saving the Zoning Configuration
Saving a New or Modified Storage Access Configuration
Backing Up the Storage Access Configuration
Save the Zoning Configuration to a Backup File Using the Web Interface
Save the Zoning Configuration to a Backup File Using the CLI
Recovering Zoning Configurations
Recover Zoning Configurations Using the Web Interface
Recover Zoning Configurations Using the CLI
Resetting the Zoning Configuration
Reset the Zoning Configuration Using the Web Interface
Reset the Zoning Configuration Using the CLI
Reset the Zoning Password Using the Web Interface
Reset the Zoning Password Using the CLI
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.