Index |
about domains and groups, 1
address Property, 1
configuration properties, 1
defaultrole Property, 1
determining user authorization levels, 1
logdetail Property, 1
overview, 1
port Property, 1
purposes used for, 1
state Property, 1
strictcertmode Property, 1
typical uses, 1
User Authentication and Authorization, 1
Active Directory Web Interface, 1
default username and password, 1
defined, 1
required to launch Remote Console, 1
CLI commands for managing alerts, 1
delivering SNMP traps, 1
disabling an alert rule, 1
generating email notification, 1
generating test alerts, 1
modifying an alert rule, 1
specifying destination, 1
types of levels, 1
warnings for system failures, 1
Altiris Deployment Server, 1
baud rate, setting, 1
updating, 1
blade server modules, configuring IP addresses
editing through an Ethernet connection, 1 - 2
through static assignment, 1 - 2
set command (ILOM), table of options, 1
Chassis Monitoring Module (CMM)
managing with ILOM, 1
Chassis Monitoring Module (CMM), configuring IP addresses
editing through an Ethernet connection, 1 - 2
through static assignment, 1 - 2
cd command, 1
create command, 1
delete command, 1
exit command, 1
help command, 1
load command, 1
reset command, 1
set command, 1
show command, 1
start command, 1
stop command, 1
version command, 1
alert management commands, 1
clock settings commands, 1
general commands, 1
host system commands, 1
network and serial port commands, 1
SNMP commands, 1
syntax, 1
system access commands, 1
user commands, 1
setting using the CLI, 1
setting using the web interface, 1, 2
command quick reference, 1 - 2
command reference, 1
commands syntax, 1
ILOM target types, 1
logging in to ILOM, 1
logging out of ILOM, 1
specification based on, 1
using hierarchical architecture, 1
compared to management network, 1, 2
behavior during Remote Console session, 1
obtaining readings, 1
used with LDAP, 1
Dynamic Host Configuration Protocol (DHCP)
requirements for assigning IP address, 1
using to assign an IP address, 1
label on server, 1
capturing timestamps, 1
types of events displayed, 1
viewing and clearing using the CLI, 1
viewing and clearing using the web interface, 1
monitoring and diagnosing hardware, 1
viewing faulted components, 1 - 2
field-replaceable units (FRUs)
obtaining sensor readings, 1
updating, 1
overview, 1
redirecting keyboard and mouse, 1
host serial console, 1
HP OpenView, 1
HP Systems Insight Manager, 1
enabling using the CLI, 1
enabling using the web interface, 1 - 2
IBM Director, 1
IBM Tivoli, 1
capabilities, 1
description, 1
user interfaces supported, 1
what it runs on, 1
Integrated Lights Out Manager (ILOM)
set command, blades, table of options, 1
configuring for Remote Console, 1
connecting to, 1
features of, 1
initial setup, 1
interfaces, 1
logging in using the web interface, 1
new 2.0 features, 1
preconfigured Administrator account
logging in, 1
redirecting keyboard and mouse, 1
Remote Console, configuring and launching, 1
resetting SP using the web interface, 1
roles assigned to accounts, 1
root account password, 1
system monitoring features, 1
updating firmware using the CLI, 1
updating firmware using the web interface, 1 - 2
using Sun N1 System Manager, 1
using third-party tools, 1
viewing version using the web interface, 1
Intelligent Platform Management Interface (IPMI)
Baseboard Management Controller, 1
functionality, 1
Platform Event Trap alerts, 1
using IPMItool, 1
versions compliant with ILOM, 1
internal serial port, 1
Internet Protocol (IP) address
assigning a static IP address, 1
identifying DHCP assigned address, 1
editing using the web interface, 1 - 2
for DHCP assigned addresses, 1 - 2
for static assigned addresses to CMM, 1 - 2
for static assigned addresses to SP, 1 - 2
functions of, 1
references for, 1
client operations, 1
client-server model, 1
configuring ILOM for LDAP, 1 - 2
configuring the LDAP server, 1
distinguished names, 1
overview, 1
using the CLI, 1
using the web interface, 1
using the CLI, 1
using the web interface, 1
Management Information Base (MIB)
description of, 1
supported MIBs used with ILOM, 1 - 2
assigning IP addresses, 1
compared to data network, 1
overview, 1
media access control (MAC) address
obtaining for SP or CMM, 1
accessed by SP, 1
connecting to ILOM, 1
identifying for SP and CMM, 1 - 2
configuring using the CLI, 1
configuring using the web interface, 1 - 2
pending and active properties, 1
viewing using the CLI, 1
viewing using the web interface, 1
Operator role, 1
out-of-band management, 1
configuring for Remote Console, 1
monitoring available power, 1
monitoring individual power supply consumption, 1
monitoring permitted power consumption, 1
monitoring system actual power, 1
monitoring system total power consumption, 1
actual power, 1
available power, 1
interfaces, 1
terminology, 1
client-server model, 1
configuration parameters, 1
configuring, 1
default port number, 1
overview, 1
adding new server session, 1
configuring remote control settings, 1 - 2
connecting using the web interface, 1 - 2
controling device redirection, 1
exiting the application, 1
installation requirements, 1
launching using the web interface, 1 - 2
network ports and protocols, 1
redirecting keyboard and mouse, 1
redirecting storage device or ISO image, 1 - 2
remote control settings, 1
signing in as Administrator, 1
single and multiple server views, 1 - 2
using keyboard control modes, 1
changing using the CLI, 1
changing using the web interface, 1
Scalent Virtual Operating Environment, 1
classes supported, 1
monitoring and diagnosing faults, 1
obtaining using the CLI, 1
obtaining using the web interface, 1
types of data reported, 1
configuring serial settings, 1
connecting to ILOM, 1
configuring using the CLI, 1
configuring using the web interface, 1
default setting, 1
displaying using the web interface, 1
internal and external ports, 1
pending and active properties, 1
viewing using the CLI, 1
setting baud rate, 1
setting baud rate, 1
managing with ILOM, 1
blade options, table of, 1
Simple Network Management Protocol (SNMP)
agents functions, 1
Management Information Base, 1
management station monitoring, 1
versions supported, 1
enabling or disabling using the CLI, 1
enabling or disabling using the web interface, 1
overview, 1
using to launch the Remote Console, 1
configuring destinations using the CLI, 1
configuring destinations using the web interface, 1
example of, 1
managing using the web interface, 1 - 2
targets, properties, and values of, 1
Solaris 10 Operating System, configuring the factory-installed OS
using a Secure Shell (SSH) connection, 1
connecting to a SP, 1, 2, 3, 4, 5, 6, 7, 8
key encryption using the CLI, 1
requirements for assigning, 1
customer changeable states, 1
illuminating conditions, 1
system assigned states, 1
viewing using the CLI, 1
viewing using the web interface, 1
overview, 1
obtaining readings, 1
using the web interface, 1
adding and setting privileges using the web interface, 1
adding using the CLI, 1
Administrator privileges, 1
configuring using the CLI, 1
deleting using the CLI, 1
deleting using the web interface, 1
modifying using the CLI, 1
modifying using the web interface, 1
number of accounts supported, 1
roles assigned, 1
specifying names for, 1
viewing a list of, 1
viewing a specific account, 1
viewing an individual session using the CLI, 1
viewing using the CLI, 1
viewing using the web interface, 1
buttons, 1
logging in, 1
supported browsers, 1
types of access, 1
uploading SSL certificate, 1
Copyright © 2008 Sun Microsystems, Inc. All Rights Reserved.