| Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide |     |
Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide
CLI Procedures Guide
820-6412-12
|
Contents |
ILOM CLI -- DMTF Server Management Command-Line Protocol User-Interface
Server SP or CMM Network Addresses Accepted by ILOM CLI
Examples for Entering an IPv6 Address
ILOM CLI Firmware and CLI Prompt
Server SP and CMM CLI Management Targets
Entering CLI Command Syntax and Executing Commands
ILOM 3.0 Properties Versus ILOM 2.x Properties
2. Logging In to and Out of ILOM
Log In to ILOM CLI - Using ILOM Default User Account and Password
Log In to ILOM CLI - Using ILOM User Name and Password
Set a Timeout Value for a CLI Session
Configure Banner Messages in ILOM
Logging Out of ILOM and Recovering a Lost Password
3. Configuring ILOM Communication Settings
View and Configure IPv4 Network Settings
Targets, Properties, and Values
Edit Existing IPv4 Addresses in ILOM
View and Configure Dual-Stack IPv4 and IPv6 Network Settings
Test IPv4 or IPv6 Network Configuration
Assign Host Name and System Identifier
View and Configure DNS Settings
Targets, Properties, and Values
View and Configure Serial Port Settings
Targets, Properties, and Values
Enable HTTP or HTTPS Web Access
Targets, Properties, and Values
Configuring Secure Shell Settings
Establish a Secure Remote SSH Connection
Configuring the Local Interconnect Interface
Configure the Local Interconnect Interface
Change a User Account Password
Assign Roles to a User Account
View an Individual User Session
Enable Active Directory strictcertmode
Check Active Directory certstatus
Remove an Active Directory Certificate
View and Configure Active Directory Settings
Troubleshoot Active Directory Authentication and Authorization
Configuring Lightweight Directory Access Protocol
Enable LDAP/SSL strictcertmode
Remove an LDAP/SSL Certificate
View and Configure LDAP/SSL Settings
Troubleshoot LDAP/SSL Authentication and Authorization
Viewing Component Information and Managing System Components
6. Monitoring System Components
Monitoring System Sensors, Indicators, and ILOM Event Logs
View and Clear the ILOM Event Log
Configure Remote Syslog Receiver IP Addresses
View and Clear Faults Using the CLI
Viewing the SP Console History Log
View and Manage SP Console History Log Entries Using the ILOM CLI
7. Monitoring Storage Components and Zone Manager
Viewing and Monitoring Storage Components
Show Property Details for HDDs and RAID Controllers
Enabling or Disabling Zone Manager
Managing Alert Rule Configurations
Send Test Email Alert to a Specific Destination
CLI Commands for Managing Alert Rule Configurations
Configuring SMTP Client for Email Notification Alerts
Downloading SNMP MIBs Directly From ILOM
9. Power Monitoring and Management of Hardware Interfaces
Summary of Power Management Feature Updates
Monitoring System Power Consumption
Monitor Total System Power Consumption
Monitor Actual Power Consumption
Monitor Individual Power Supply Consumption
Monitor Server Hardware Maximum Power Consumption
Monitor Permitted Power Consumption
Monitor Power Consumption History
Configuring Power Policy Settings to Manage Server Power Usage
Configure Server SP Power Policy
Configuring Power Consumption Threshold Notifications
View and Configure Notification Thresholds Using the CLI
Monitoring Component Power Allocation Distributions
View Server Power Allocations for All System Components
View Server Component Power Allocations
View CMM Power Allocations for All Chassis Components
View CMM Component Power Allocations
View Blade Slots Granted Power or Reserved Power as of ILOM 3.0.10
View Granted Power or Grant Limit for Blade as of ILOM 3.0.10
Configuring Power Limit Properties
Configure Permitted Power for Blade Slots
Configure Server Power Budget Properties
Configure Grant Limit for aBlade as of ILOM 3.0.10
Monitoring or Configuring CMM Power Supply Redundancy Properties
Monitor or Configure CMM Power Supply Redundancy Properties
10. Backing Up and Restoring ILOM Configuration
Backing Up the ILOM Configuration
Back Up the ILOM Configuration
Restoring the ILOM Configuration
Restore the ILOM Configuration
Resetting the ILOM Configuration
Reset the ILOM Configuration to Defaults
Identify ILOM Firmware Version
Download New ILOM Firmware Image
Recover From a Network Failure During Firmware Update
12. Managing Remote Hosts Storage Redirection and Securing the ILOM Remote Console
Performing the Initial Setup Tasks for Storage Redirection
Start Storage Redirection Service Using Mozilla Firefox Web Browser
Start Storage Redirection Service Using Internet Explorer (IE) Web Browser
Download and Install the Storage Redirection Client
Launching the Storage Redirection CLI to Redirect Storage Devices
Launch Storage Redirection CLI Using a Command Window or Terminal
Verify the Storage Redirection Service Is Running
Display Storage Redirection CLI Help Information
Start Redirection of Storage Device
View Active Storage Redirections
Stop Redirection of Storage Device
Change the Default Storage Redirection Network Port: 2121
Securing the ILOM Remote Console
Edit the ILOM Remote Console Lock Option
Enabled Custom Lock Mode Example
13. Managing Remote Host Power States, BIOS Boot Device, and Host Server Console
Issuing Remote Power State Commands for Host Server or CMM
Issue Remote Power State Commands From Server SP or CMM CLI
Managing BIOS Boot Device on x86 Hosts
Configure BIOS Host Boot Device Override
View and Configure Host Console Properties
Start Host Console and Display Console History and Bootlog
14. Managing TPM and LDom States on SPARC Servers
Controlling the TPM State on a SPARC Server
Control TPM State on a SPARC Server
Managing LDom Configurations on SPARC Servers
View Targets and Properties for Stored LDom Configurations on SPARC T3 Series Server
Specify Host Power to a Stored LDom Configuration
Enable or Disable the Control Domain Property Values
15. Performing Remote Host System Diagnostics
Diagnosing x86 Systems Hardware Issues
Configure and Run Pc-Check Diagnostics
Generate a Non-Maskable Interrupt
Diagnosing SPARC Systems Hardware Issues
Specify the Diagnostics Trigger
Specify Verbosity of Diagnostics Output
Collecting SP Data to Diagnose System Problems
Collect SP Data to Diagnose System Problems
B. Storage Redirection Command-Line Modes, Syntax, and Usage
C. Diagnosing IPv4 or IPv6 ILOM Connection Issues
D. Manual Host OS Configuration Guidelines for Local Interconnect Interface
| Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide | 820-6412-12 | |
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.