Installation Quick Test

To verify proper installation and operation of the SunVideo Plus card and software, do the following:

1. Complete the installation of the SunVideo Plus card and software, and ensure that the XIL environment variables are correctly set.

2. Connect a video source to the Composite Port 1 of the card.

   ---

   Note -

   If your video source is an S-Video device, connect the S-Video cable to the SunVideo Plus S-Video connector.

   ---

3. Run the xil_display program to test the video capabilities of the card.

   To do this, type:

   ---

   hostname% xil_display
   

   ---

   This will display 99 frames, then it will exit.

   If your video source is an S-Video device, type the following to use the S-Video source:

   ---

   hostname% xil_display -I 0
   

   ---

4. Connect an audio line input device to the audio input jack and connect speakers to the audio line output jack.

5. Run the olk_audloop program to test the audio capabilities of the card.

   To do this, type:

   ---

   hostname% o1k_audloop
   

   ---

   Press Control-c when finished.