Sun Ultra 20 M2 Workstation Service Manual
|
|
This appendix lists features and specifications for the Sun Ultra 20 M2 Workstation and includes the following sections:
Note - For maximum reliability and performance, install your Sun Ultra 20 M2 Workstation into a proper environment and ensure correct configuration as discussed in this appendix.
|
A.1 System Components and Features
TABLE A-1 shows the system's key components.
TABLE A-1 Sun Ultra 20 M2 Workstation Components
Component
|
Description
|
CPU
|
- One dual-core AMD Opteron processor
- Processor frequencies: 1.8 GHz and faster
- 1 MB Level 2 Cache per processor core
|
Memory
|
|
Media storage
|
DVD-ROM or DVD-Dual
|
Hard disk drives
|
Up to two SATA disk drives
|
Power supply
|
400W PSU
|
Network I/O
|
Onboard 10/100/1000BASE-T Gigabit Ethernet controller providing 2 RJ45 connectors on the back panel
|
Video
|
Onboard ATI graphics controller with DB15 VGA graphics connector
|
PCI-E I/O and PCI I/O
(see Section A.3, PCI-E and PCI Expansion Slots)
|
- One PCI Express x16 graphics slot
- One PCI Express x1 expansion slot
- One PCI Express x16 mechanical connector slot
(PCI-E x8 electrical)
- Three PCI 33 MHz 32-bit slots
|
Other I/O
|
- Six USB 2.0 connectors (two on the front and four on the back of the workstation)
- Two IEEE 1394 connectors on the front panel
- Line-in/line-out jacks on the back panel
- Microphone-in jack on the front and back panels
- Headphone-out jack on the front panel
|
A.2 Memory Configurations
TABLE A-2 lists the possible memory configurations for the Sun Ultra 20 M2 Workstation.
The system requires DDR2-667, unbuffered, ECC DIMMs installed in pairs (except the base 512 MB configuration). You can purchase DIMM kits at:
http://store.sun.com
DIMM slots are numbered from DIMM 0 to DIMM 3. Populate DIMM slots starting farthest from the CPU (that is, starting with slot 3).
TABLE A-2 Sun Ultra 20 M2 Workstation Memory Configurations
Total Memory
|
Supported DIMM Configuration 1
|
Supported DIMM Configuration 2
|
512 MB
|
1 x 512 MB
|
|
1 GB
|
2 x 512 MB
|
|
2 GB
|
2 x 1 GB
|
4 x 512 MB
|
3 GB
|
2 x 1 GB and
2 x 512 MB
|
|
4 GB
|
2 x 2 GB
|
4 x 1 GB
|
5 GB
|
2 x 2 GB and
2 x 512 MB
|
|
6 GB
|
2 x 2 GB and
2 x 1 GB
|
|
8 GB
|
4 x 2 GB
|
|
A.3 PCI-E and PCI Expansion Slots
TABLE A-3 lists the characteristics of the available PCI-E and PCI expansion slots.
TABLE A-3 Internal Expansion Slots
Slot
|
Connector Type
|
Length
|
Height
|
Description
|
Position
|
0
|
PCI-Express x16
(x16 electrical)
|
x16
|
Full
|
Nearest to power supply. For FX 3500, FX 1500, FX 560, or NVS 285 graphics accelerator, or any PCI-Express expansion cards such as NIC adapters.
|
Top
|
1
|
PCI-Express x1
|
x1
|
Full
|
Not for graphics accelerators. Intended for PCI-Express expansion cards such as NIC.
|
Middle
|
2
|
PCI-Express x16 mechanical
(x8 electrical)
|
x16
|
Full
|
Not for graphics accelerators. Intended for PCI-Express expansion cards such as NIC.
|
Bottom
|
0
|
Conventional PCI
(PCI v2.3 32-bit/33 Mhz, 5V)
|
Full
|
Full
|
Open slot.
Accommodates only 32-bit cards. 64-bit cards will not fit on the motherboard.
|
Top
|
1
|
Conventional PCI
(PCI v2.3 32-bit/33 Mhz, 5V)
|
Full
|
Full
|
Open slot.
Accommodates 64-bit PCI cards, but cards operate in 32-bit mode.
|
Middle
|
2
|
Conventional PCI
(PCI v2.3 32-bit/33 Mhz, 5V)
|
Full
|
Full
|
Open slot (farthest from power supply). Accommodates 64-bit PCI cards, but cards operate in 32-bit mode.
|
Bottom
|
A.4 Physical Specifications
TABLE A-4 lists the physical specifications for the Sun Ultra 20 M2 Workstation.
TABLE A-4 Sun Ultra 20 M2 Workstation Physical Specifications
Specification
|
British
|
Metric
|
Width
|
7.9 in.
|
200 mm
|
Depth
|
18.5 in.
|
470 mm
|
Height
|
17.1 in.
|
435 mm
|
Weight (max with packaging)
|
34 lb
|
15.4 kg
|
A.5 Power Specifications
The maximum continuous power for the Sun Ultra 20 M2 Workstation is 400W.
TABLE A-5, TABLE A-6, and TABLE A-7 list additional power specifications for the system.
TABLE A-5 Input Voltage Range
Input Voltage
|
Minimum
|
Nominal
|
Maximum
|
Units
|
Range 1
|
90
|
115
|
132
|
Vrms
|
Range 2
|
180
|
230
|
264
|
Vrms
|
TABLE A-6 Input Frequency Range
Input Frequency
|
Minimum
|
Nominal
|
Maximum
|
Units
|
Range 1
|
57
|
60
|
63
|
Hz
|
Range 2
|
47
|
50
|
53
|
Hz
|
TABLE A-7 Input Current
Input Voltage
|
Maximum Input Current
|
Maximum Inrush Current
|
Range 1
|
10A
|
50 Apeak
|
Range 2
|
5A
|
100 Apeak
|
A.6 Environmental Specifications
TABLE A-8 lists the environmental specifications for the Sun Ultra 20 M2 Workstation.
TABLE A-8 Sun Ultra 20 M2 Workstation Environmental Specifications
Specification
|
State
|
British
|
Metric
|
Humidity
|
Operating
|
7%-93% RH noncondensing,
100.4° F max wet bulb
|
7%-93% RH noncondensing,
38° C max wet bulb
|
|
Nonoperating
|
93% RH, noncondensing,
109.4° F max wet bulb
|
93% RH, noncondensing,
43° C max wet bulb
|
Vibration
|
Operating
|
0.25G in all axes, 5-500 Hz sine
|
|
|
Nonoperating
|
1.2G in all axes, 5-500 Hz sine
|
|
Shock
|
Operating
|
4.5G, 11 msec. half-sine
|
|
Temperature
|
Operating
|
41° F to 95° F
|
5° C to 35° C
|
|
Nonoperating
|
-40° F to 149° F
|
-40° C to 65° C
|
Maximum operating temperature rating
|
|
-1.8° F for every 985 ft in altitude
|
-1° C for every 300 m in altitude
|
Altitude
|
Operating
|
max 9,843 ft
|
max 3,000 m
|
|
Nonoperating
|
max 39,370 ft
|
max 12,000 m
|
Sun Ultra 20 M2 Workstation Service Manual
|
819-6584-11
|
|
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.