A P P E N D I X A |
Error Messages |
This appendix describes the error messages generated by the SAI/P device driver.
The following error messages are generated by the device driver:
WARNING: PCI SAI/8 memory allocation error. <2>
What it means: The operating system would not allocate memory to the driver.
Action to take: Adjust kernel resources. Reboot.
WARNING: PCI SAI/8 not resetting. <3>
What it means: The board doesn't respond to reset.
Action to take: Make sure the board is fully seated in the slot. Potential hardware problem.
WARNING: PCI SAI/8: No memory at 0xXX <4>.
What it means: The driver cannot read the board's dual ported memory.
Action to take: Make sure the board is fully seated in the slot. Potential hardware problem.
WARNING: PCI SAI/8: port X failed diagnostics <5>.
What it means: The driver encountered an error executing the on-board BIOS.
Action to take: Potential software problem.
WARNING: PCI SAI/8 FEPOS not functioning. <7>
What it means: The driver encountered an error executing the on-board FEPOS.
Action to take: Potential software problem. Potential hardware problem.
WARNING: saip_driver attach(0): Can't get config info for PCI saip8 (#0)
What it means: The driver found a board in the system that has not been configured.
Action to take: Uninstall driver with pkgrm. Install driver with pkgadd. Either use the auto-install option or select the appropriate number of boards.
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.