Skip Navigation Links | |
Exit Print View | |
Sun Fire X4800 Server Installation Guide for Windows Operating Systems Sun Fire X4800 Server Documentation |
About This Documentation (PDF and HTML)
Introduction to Windows Installation
Windows Installation Task Overview
Getting Started With the Windows Server 2008 Installation
Supported Windows Operating Systems
Windows Server 2008 Installation Considerations
Differences Between the Windows Server 2008 R2 and SP2 Installation Procedures
Selecting a Media Delivery Method
Windows Media Delivery Methods
Oracle Hardware Installation Assistant
Oracle Hardware Installation Assistant Task Overview
Obtaining Oracle Hardware Installation Assistant
How to Download Server Software
How to Set Up the JavaRConsole System
Installing Windows Server 2008
How to Install Windows Server 2008
How to Install Windows Server 2008 Using PXE
Updating Critical Drivers and Installing Supplemental Software
Installing Critical Device Drivers
Installing Supplemental Software
How to Install the Supplemental Software
Managing RAID Using the MegaRAID Storage Manager
Configuring Support for the Trusted Platform Module
Incorporating Device Drivers into WIM Images for WDS
Location of Device Drivers on Tools and Drivers DVD
Device Drivers to Incorporate Into WIM Images
Prerequisites and Task Overview for the Device Driver WIM Images
Incorporating Drivers Into the WIM Image
Downloading the ISO Image for the Tools and Drivers DVD
Identifying Network Interfaces in Windows
How to Determine the Server's Active Network Data Ports
How to Confirm Physical Port MAC Addresses and Map Them to Windows Device Names
DVDname\Windows\W2K8\Packages
DVDname\Windows\W2K8R2\Packages
Note - You should always accept default installable items to ensure that the most recent versions of the drivers are installed.
The Install Pack notice dialog box appears.
The Welcome to the Sun Fire Installation Wizard appears.
The End User License Agreement page appears.
The platform-specific drivers are installed. A green check mark verifies that each driver was installed successfully.
The System Settings Change screen appears.
Note - If you plan on installing supplemental software (highly recommended), do not restart your system at this time. After supplemental software is installed, you are prompted to restart the system.
Choose one of the following:
No – If you accept the default installable items settings in the earlier step, click No to proceed to Installing Supplemental Software.
Yes – If you are not installing the supplemental software, click Yes to restart your computer.
See Also