How to Remove the Rack Mounting Hardware from the Rack

This task shows how to remove the rack mounting hardware from the universal rack and from the standard rack. This task is similar for each; however the universal rack is shown.

In this procedure, the differences between the universal rack and the standard rack are trivial, except where they are noted.

1. Remove the four locking screws (1).

   Perform this step for the universal rack mounting kit only. The standard rack mounting kit does not include these screws.

   See the following figure.

2. Lift the two shelf rails (2) to disengage the hooks from the adapter brackets.

   You can compress the shelf rails once you have disengaged the hooks from the adapter brackets.

3. Remove the screws that hold the adapter brackets (3 and 4) in place and remove the brackets.

   The universal rack mounting kit is shown. The standard rack mounting kit is similar, but slightly different.

   
   
4. Remove the screws (1) that hold the rear braces (2) in place and remove the braces.

   Perform this step for the universal rack mounting kit only. The standard rack mounting kit does not include these braces.