Sun Java System Message Queue 3.7 UR1 Technical Overview

Chapter 4 Broker Clusters

Message Queue supports the use of broker clusters: groups of brokers working together to provide message delivery services to clients. Clusters enable an administrator to scale messaging operations with the volume of message traffic by distributing client connections among multiple brokers.

This chapter discusses the architecture and internal functioning of such broker clusters. It covers the following topics:

Note that broker clusters provide service availability but not data availability. If one broker in a cluster fails, clients connected to that broker can reconnect to another broker in the cluster but may lose some data while they are reconnected to the alternate broker.

Cluster Architecture

Figure 4–1 shows Message Queue’s architecture for broker clusters. Each broker within a cluster is directly connected to all the others. Each client (message producer or consumer) has a single home broker with which it communicates directly, sending and receiving messages as if that broker were the only one in the cluster. Behind the scenes, the home broker works in concert with the other brokers to provide delivery services for all connected clients.

In a cluster, service availability depends on brokers being able to share information about destinations and durable subscribers. If a clustered broker fails, it is possible that this state information gets out of sync. To guard against this possibility, you can designate one broker within the cluster as the master broker. The master broker maintains a configuration change record to track changes to the cluster’s persistent entities (destinations and durable subscriptions). This record is used to propagate such change information to brokers that were offline when the changes occurred.

Figure 4–1 Cluster Architecture

Diagram showing three clustered brokers, one of which
is a master broker. Figure explained in text.

The following sections discuss how message delivery takes place within a cluster and how the brokers are configured and synchronized, even in the case when one or more has been offline.

Message Delivery

In a cluster configuration, brokers share information about destinations and message consumers: each broker knows the following information”

This allows each broker to route messages from its own directly connected message producers to remote message consumers. The home broker of a producer has different responsibilities from the home broker of the consumer:

Clustered brokers work together to minimize message traffic within the cluster; for example, if a remote broker has two identical subscriptions for the same topic destination, the message is sent over the wire only once. You can further reduce traffic by setting a destination property specifying that delivery to local consumers has priority over delivery to remote consumers.

If secure, encrypted message delivery between client and broker is required, you can configure a cluster to provide secure delivery of messages between brokers.

Destination Attributes

Attributes set for a physical destination on a clustered broker apply to all instances of that destination in the cluster; however, some limits specified by these attributes apply to the cluster as a whole and others to individual destination instances. Table 4–1 lists the attributes you can set for a physical destination and specifies their scope.

Table 4–1 Properties for Physical Destinations on Clustered Brokers

Property Name 

Scope 

maxNumMsgs

Per broker. Thus, distributing producers across a cluster, allows you to raise the limit on total unconsumed messages. 

maxTotalMsgBytes

Per broker. Thus, distributing producers across a cluster, allows you to raise the limit on total memory reserved for unconsumed messages. 

lmitBehavior

Global 

maxBytesPerMsg

Per broker 

maxNumProducers

Per broker 

maxNumActiveConsumers

Global 

maxNumBackupConsumers

Global 

consumerFlowLimit

Global 

localDeliveryPreferred

Global 

isLocalOnly

Global 

useDMQ

Per broker 

Clustering and Destinations

Whether a destination is created by an administrator, is created automatically, or is temporary, affects how the destination is propagated in a cluster and how it is handled in the event of connection or broker failure. The following subsections examine a few use cases to determine when a destination is created and how it's replicated. These include:

Producing to a Queue Using the Reply-To Model

The figure below shows how destinations are created and replicated when a client produces to a queue and uses the reply-to model.

Figure 4–2 Replication of Destinations in a Cluster: Queue with Reply-To

Figure showing the propagation of destinations in a cluster.
Detailed explanation follows in text.

  1. The administrator creates the physical destination QW. The queue is replicated throughout the cluster at creation time.

  2. Producer ProdQW sends a message to queue QW and uses the reply-to model, directing replies to temporary queue TempQ1W. (The temporary queue is created and replicated when an application creates a temporary destination and adds a consumer.)

  3. The home broker, BrokerW, persists the message sent to QW and routes the message to the first active consumer that meets the selection criteria for this message. Depending on which consumer is ready to receive the message, the message is delivered either to consumer C1QW (on BrokerX) or to consumer C2QW (on BrokerZ). The consumer receiving the message, sends a reply to the destination TempQ1W.

Producing to an Auto-Created Destination

The next figure shows how destinations are created and replicated in the case of a producer that sends a message to a destination that does not exist and has to be automatically created.

Figure 4–3 Replication of Destinations in a Cluster: Auto-Created Destinations

Figure showing the propagation of destinations in a cluster.
Detailed explanation follows in text.

  1. Producer ProdAutoQY sends a message to a destination AutoQY that does not exist on the broker.

  2. The broker persists the message and creates destination AutoQY.

    Auto-created destinations are not automatically replicated across the cluster. Only when a consumer elects to receive messages from a queue AutoQY, would that consumer’s home broker create the destination AutoQY and convey the message to the consumer. At the point where one consumer creates the autocreated destination, the destination is replicated across the cluster. In this example, when the consumer CAutoQY, creates the destination, the replication takes place.

Publishing to a Topic Destination

The following figure shows how destinations are created and replicated in a cluster when a client publishes a message to a topic destination that is created by the administrator.

Figure 4–4 Replication of Destinations in a Cluster: Publishing to a Topic

Figure showing the propagation of destinations in a cluster.
Detailed explanation follows in text.

  1. The administrator creates the physical topic destination TY. The admin-created destination TY is replicated throughout the broker cluster (before the destination is used).

  2. Publisher PubTY, sends a message to topicTY.

  3. The home broker, BrokerY, persists any messages published to TY and routes the messages to all topic subscribers that match the selection criteria for this message. In this example C1TY and C2TY are subscribed to topicTY.

Handling Destinations in the Event of Connection or Broker Failure

Table 4–2 explains how different kinds of destinations are replicated and deleted in a cluster.

Table 4–2 Handling Destinations in a Cluster

Destination 

Propagation, and Deletion 

Admin-created 

When the destination is created it is propagated in the cluster, and each broker stores information about the destination persistently. 

The destination is destroyed when the administrator explicitly deletes it. 

If there is a master broker, a record of the creation and deletion is stored in the master broker to allow brokers in the cluster to synchronize state information. 

Temporary 

When the destination is created, it is propagated around the cluster. 

If the consumer associated with the temporary destination is allowed to reconnect, the destination is persistently stored on the consumer’s home broker. Otherwise, the destination is never stored. 

If the consumer loses its connection, the destination is deleted on all brokers. 

If the consumer’s home broker crashes and the consumer is allowed to reconnect, temporary destinations associated with this consumer are monitored. If the consuming client does not reconnect within a specific period of time, it is assumed that the client has failed and the destination is deleted. 

Auto-created 

When a producer is created and a destination does not exist, the destination is created on the producer’s home broker. 

When a consumer is created for a destination that does not exist, information about the consumer and the destination is propagated across the cluster. 

An auto-created destination can be explicitly deleted by an administrator, or it can be automatically deleted 

  • By each broker when there have been no consumers or messages for a given period of time.

  • By each broker, when the broker restarts and there are no messages for that destination.

Cluster Configuration

To establish connections between the brokers in a cluster at startup time, each broker must be passed the host names and port numbers of all the others (including the master broker, if any). This information is specified by a set of cluster configuration properties, which should be the same for all brokers in the cluster. Although you can specify the configuration properties for each broker individually, this approach is error-prone and can easily lead to inconsistencies in the cluster configuration. Instead, it is recommended that you place all the configuration properties in one central cluster configuration file that is referenced by each broker at startup time. This ensures that all brokers share the same configuration information.

See Cluster Configuration Properties in Sun Java System Message Queue 3.7 UR1 Administration Guidefor detailed information on cluster configuration properties.


Note –

Although the cluster configuration file was originally intended for configuring clusters, it is also a convenient place to store other properties that are shared by all brokers in a cluster.


Cluster Synchronization

Whenever a cluster’s configuration is changed, information about the change is automatically propagated to all brokers in the cluster. A cluster configuration changes when one of the following events occurs:

Information about these changes is propagated immediately to all brokers in the cluster that are online at the time of the change. However, a broker that is offline (one that has crashed, for example) will not receive notice of the change when it occurs. To accommodate offline brokers, Message Queue maintains a configuration change record for the cluster, recording all persistent entities (destinations and durable subscriptions) that have been created or destroyed. When an offline broker comes back online (or when a new broker is added to the cluster), it consults this record for information about destinations and durable subscribers, then exchanges information with other brokers about currently active message consumers.

One broker in the cluster, designated as the master broker, is responsible for maintaining the configuration change record. Because other brokers cannot complete their initialization without the master broker, it should always be the first broker started within the cluster. If the master broker goes offline, configuration information cannot be propagated throughout the cluster, because other brokers cannot access the configuration change record. Under these conditions, you will get an exception if you try to create, reconfigure, or destroy a destination or a durable subscription or attempt a related operation such as reactivating a durable subscription. (Non-administrative message delivery continues to work normally, however.) The use of a master broker and a configuration change record is optional. They are only required if you are concerned with cluster synchronization after cluster configuration changes or a broker failure.