C H A P T E R 3 |
Unpacking Your SCSI Array |
This chapter describes the procedure for unpacking the Sun StorEdge 3320 SCSI array package. Topics covered in this chapter are as follows:
Follow these guidelines for unpacking the equipment.
1. Select a suitable area for unpacking.
2. Store all packing material and boxes for possible equipment returns.
3. Check the Contents Sheet in your product package. See Section 3.2, Checking the Sun StorEdge 3320 SCSI Array Package Contents.
The Contents Sheet summarizes the standard contents for your product.
4. Compare the packing slip and the list of parts with the items you received.
If the list of parts on your packing slip does not match the items you received, or any items appear damaged, immediately notify your carrier agent and the supplier who prepared your shipment.
5. Carefully examine the cables provided in the package.
If any cable appears to be damaged, contact the Technical Service department for an immediate replacement.
6. Check the list of Section 3.4, Customer-Provided Cables.
These are required to complete your installation.
Caution - You must purchase or provide 320M-compliant SCSI cables for connecting the Sun StorEdge 3320 SCSI array to host servers. |
It is important to inspect your Sun StorEdge 3320 SCSI array packages for standard items as well as purchased options before you begin installation. If any parts are missing or damaged, contact your sales representative immediately.
|
|
SCSI jumper cable, 1-foot (30cm), VHDCI-VHDCI (for bus setting) |
|
SCSI jumper cable, 1.5-foot (45cm), VHDCI-VHDCI (if you ordered a JBOD or expansion unit) |
|
Shielded CAT-5 Ethernet cable, one per controller in each array |
|
DC power cables if you ordered a DC-powered array [1] |
|
AC power cables if you ordered an AC-powered array (shipped separately as part of the country kit). 1 |
|
AC cord locks in a plastic bag if you ordered an AC-powered array |
|
Front-bezel keys in a plastic bag, to secure the front bezel onto the chassis |
|
Purchased options. These options are ordered at the time of purchase and are integrated into or added to the unit prior to delivery. |
Check that you received all field-replaceable units (FRUs) ordered with your Sun StorEdge 3320 SCSI array. For additional FRUs, consult your sales representative. For instructions on how to install or replace FRUs, review the following manuals located on the product web site:
For a list of the FRU part numbers, refer to the Sun StorEdge 3000 Family FRU Installation Guide.
Customers must provide one Ultra 320 SCSI cable per host to connect a host to a RAID array, expansion unit or JBOD; up to two host cables might be needed per array. To obtain qualified cables, consult your Sun sales representative.
Refer to the Sun StorEdge 3000 Family Rack Installation Guide for 2U Arrays for instructions on how to install and prepare a rack or cabinet for mounting your array.
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.