Index (Sun Cluster 3.1 Software Installation Guide)

Sun Cluster 3.1 Software Installation Guide

Previous: Appendix B Installing and Configuring VERITAS Volume Manager


A

	adapters
		Ethernet
			`local-mac-address?` variable changes during upgrade ( )
			`local-mac-address?` variable configuration ( )
			`local-mac-address?` variable requirements ( )
		IP Network Multipathing group requirements ( )
		removing bad configuration information ( )
		SCI-PCI
			configuring on additional nodes ( )
			configuring on the first node ( )
			installing Solaris packages ( )
			installing Solaris packages with JumpStart ( )
			installing Sun Cluster packages ( ) ( ) ( ) ( )
			installing Sun Cluster packages with JumpStart ( )
			package requirements ( )
			port names ( ) ( ) ( )
		test IP addresses ( )

	adding
		See also installing
		disk drives to a diskset ( )
		mediator hosts ( )
		nodes to the Sun Cluster module to Sun Management Center ( )

	administrative console
		IP addresses ( )
		`MANPATH` ( )
		`PATH` ( )

	alternate boot path, displaying ( )

	Apache
		installing packages ( )
		modifying links during upgrade ( )

	authentication list
		adding nodes during Sun Cluster installation ( )
		adding nodes during VxVM installation ( )

	`autoscinstall.class` file ( )


B

	boot devices, determining the alternate boot path ( )


C

	`cconsole` command ( )

	CCP
		See Cluster Control Panel (CCP)

	`ccp` command ( )

	`.cdtoc` file, requirements for SunPlex Manager installation ( )

	checking
		See verifying

	`class` file, modifying ( )

	Cluster Control Panel (CCP)
		installing ( )
		starting ( )

	cluster file systems
		caution notice ( )
		checking the configuration ( )
		configuring ( )
		planning ( ) ( )
		required mount options ( )

	cluster interconnects
		planning ( )
		removing bad configuration information ( )

	cluster name ( )

	cluster nodes
		adding to the Sun Cluster module to Sun Management Center ( )
		determining the ID number ( )
		installing
			additional nodes ( )
			by using JumpStart ( )
			by using SunPlex Manager ( )
			first node ( )
		planning ( )
		upgrading ( )

	`clusters` file, administrative console ( )

	configuring
		cluster file systems ( )
		disksets ( )
		IP Network Multipathing groups ( ) ( )
		`md.tab` file ( )
		name service switch ( )
		Network Time Protocol (NTP) ( )
		`ntp.conf` file ( )
		quorum devices ( )
		Solaris Volume Manager ( )
		Solstice DiskSuite ( )
		state database replicas ( )
		user accounts for SunPlex Manager ( )
		user work environment ( )
		VERITAS Volume Manager (VxVM) ( )

	console-access devices
		IP addresses ( )
		planning ( )
		serial port numbers ( )

	creating
		See configuring


D

	data services
		installing by using `scinstall` ( )
		installing by using SunPlex Manager ( )
		upgrading ( )

	deporting disk device groups ( )

	device groups
		See disk device groups

	device IDs (DID)
		determining names ( )
		displaying names ( )

	DID
		See device IDs (DID)

	Dirty Region Logging (DRL), planning ( )

	disabling install mode ( )

	disk device groups
		evacuating ( )
		importing and deporting ( )
		node lists
			removing nodes from ( )
			viewing ( )
		planning ( )
		registering disk groups as ( )
		reminoring ( )
		verifying the configuration ( )

	disk drives
		adding to disksets ( )
		repartitioning ( )

	disk groups
		See also disk device groups
		configuring ( )

	disk strings, mediator requirements ( )

	disksets
		adding disk drives ( )
		configuring ( )
		configuring the maximum allowed ( )
		planning the maximum number ( )
		repartitioning disk drives ( )

	domain console network interfaces, IP addresses ( )

	drives
		See disk drives

	DRL
		See Dirty Region Logging (DRL)

	Dynamic Multipathing (DMP) ( ) ( )


E

	enabling the kernel cage ( )

	encapsulated root disks
		configuring ( )
		mirroring ( )
		planning ( )

	Enclosure-Based Naming, planning ( )

	error messages
		`sccheck` command ( ) ( ) ( )
		`xntpd` daemon ( )

	`/etc/clusters` file, administrative console ( )

	`/etc/inet/hosts` file ( ) ( )
		JumpStart ( )

	`/etc/inet/ntp.conf` file
		changes during upgrade ( )
		configuring ( )
		default ( )

	`/etc/init.d/xntpd.cluster start` command ( )

	`/etc/init.d/xntpd start` command ( )

	`/etc/lvm/md.tab` file ( )

	`/etc/name_to_major` file
		on non-VxVM nodes ( ) ( ) ( )
		on VxVM–installed nodes ( ) ( ) ( )

	`/etc/nsswitch.conf` file ( )

	`/etc/release` file ( )

	`/etc/serialports` file ( )

	`/etc/system` file
		`kernel_cage_enable` variable ( )
		stack size setting ( )

	`/etc/user_attr` file, adding users to ( )

	`/etc/vfstab` file
		adding mount points ( )
		checking the configuration ( )
		modifying during upgrade ( )

	Ethernet adapters
		`local-mac-address?` variable
			changes during upgrade ( )
			configuring ( )
			requirements ( )


F

	file–system logging, planning ( )

	`finish` script, JumpStart ( )


G

	global devices
		caution notice ( )
		`/global/.devices` directory
			mirroring ( )
			`node@nodeid` file system ( )
		`/globaldevices` partition
			creating ( )
			planning ( )
		planning ( )
		updating the namespace ( )

	`/global` directory ( )

	global file systems
		See cluster file systems


H

	help ( )

	`hosts` file ( ) ( )
		JumpStart ( )

	hot spare disks, planning ( )


I

	importing disk device groups ( )

	initialization files, configuring the user work environment ( )

	install mode
		disabling after installation ( )
		verifying ( )

	installing
		See also adding
		Apache packages ( )
		caution when rebooting the first-installed node ( )
		Cluster Control Panel (CCP) ( )
		data services
			by using `scinstall` ( )
			by using SunPlex Manager ( )
		RSMAPI
			Solaris packages ( )
			Solaris packages with JumpStart ( )
			Sun Cluster packages ( ) ( ) ( )
			Sun Cluster packages with JumpStart ( ) ( )
		Solaris
			alone ( )
			with Sun Cluster ( )
		Solstice DiskSuite ( )
			by using SunPlex Manager ( )
			from the Solaris CD-ROM ( )
		Sun Cluster ( )
			additional nodes ( )
			by using JumpStart ( )
			by using SunPlex Manager ( )
			first node ( )
			log files ( )
			status ( )
			verifying ( )
		Sun Cluster module to Sun Management Center ( ) ( )
		SunPlex Manager ( ) ( )
			log files ( )
		VERITAS File System (VxFS) ( )
		VERITAS Volume Manager (VxVM) ( )
			and encapsulating the root disk ( )
			without encapsulating the root disk ( )

	interconnect
		See cluster interconnect

	IP addresses, planning ( )

	IP Network Multipathing groups
		configuring ( ) ( )
		planning ( )
		test IP address requirements ( )

	IPMP
		See IP Network Multipathing groups


J

	JumpStart
		`class` file ( )
		`/etc/inet/hosts` file ( )
		`finish` script ( )
		installing Solaris and Sun Cluster ( )

	junctions
		See transport junctions


K

	`kernel_cage_enable` variable ( )

	`/kernel/drv/md.conf` file ( )
		caution notice ( ) ( )
		configuring ( )


L

	licenses, planning ( )

	loading the Sun Cluster module to Sun Management Center ( )

	`local-mac-address?` variable
		changes during upgrade ( )
		configuring ( )
		requirements ( )

	`localonly` property, enabling ( )

	log files
		Sun Cluster installation ( )
		SunPlex Manager installation ( )

	logging
		configuring ( )
		planning ( )

	logical addresses, planning ( )


M

	`MANPATH`
		administrative console ( )
		cluster nodes ( )

	`md.conf` file
		caution notice ( )
		configuring ( )
		planning ( )

	`md_nsets` field
		configuring ( )
		planning ( )

	`md.tab` file, configuring ( )

	mediators
		adding hosts ( )
		checking status ( )
		overview ( )
		planning ( )
		repairing data ( )

	metadevices
		activating ( )
		configuring the maximum allowed ( )
		planning the maximum number ( )

	minor number conflicts, repairing ( )

	mirroring
		multihost disks ( )
		planning ( )
		root disks ( )
			caution notice ( )
			planning ( )

	mount options, requirements for cluster file systems ( )

	mount points
		cluster file systems ( )
		modifying the `/etc/vfstab` file ( )

	multihost disks, mirroring ( )

	multiported disks, planning ( )


N

	NAFO groups
		See also IP Network Multipathing groups
		upgrade to IP Network Multipathing groups ( )

	name service switch, configuring ( )

	`name_to_major` file
		on non-VxVM nodes ( ) ( ) ( )
		on VxVM–installed nodes ( )

	Network Time Protocol (NTP), configuring ( )

	`nmd` field
		configuring ( )
		planning ( )

	node lists
		planning ( )
		removing nodes from ( )
		viewing ( )

	nodes
		See cluster nodes

	non-cluster mode
		rebooting into ( )
		rebooting into single-user ( )

	`nsswitch.conf file`, configuring ( )

	NTP
		See Network Time Protocol (NTP)

	`ntp.conf` file
		changes during upgrade ( )
		configuring ( )
		default ( )


O

	online help, Sun Cluster module to Sun Management Center ( )

	`/opt/SUNWcluster/bin/ccp` command ( )

	`/opt/SUNWcluster/bin` directory ( )

	`/opt/SUNWcluster/man` directory ( )


P

	partitions
		`/globaldevices` ( ) ( )
		repartitioning disk drives ( )
		`/sds` ( )
		volume manager ( )

	patches, planning ( )

	`PATH`
		administrative console ( )
		cluster nodes ( )

	PCI adapters
		See SCI-PCI adapters

	ports
		See serial ports

	private hostnames
		changing ( )
		planning ( )
		verifying ( )

	private network, planning ( )

	profile, JumpStart ( )

	public networks, planning ( )


Q

	quorum devices
		and mirroring ( )
		caution notice ( )
		initial setup ( )
		planning ( )


R

	RBAC authorization, adding to user accounts ( )

	rebooting
		caution notice ( )
		into non-cluster mode ( )
		into single-user non-cluster mode ( )

	registering, VxVM disk device groups ( )

	`release` file ( )

	Remote Shared Memory Application Programming Interface (RSMAPI)
		installing
			Solaris packages ( )
			Solaris packages with JumpStart ( )
			Sun Cluster packages ( ) ( ) ( )
			Sun Cluster packages with JumpStart ( ) ( )
		package requirements ( )

	removing Sun Cluster ( )

	repairing
		mediator data ( )
		minor number conflicts ( )

	replicas, configuring ( )

	resource groups, evacuating ( )

	resource types, reregistering after upgrade ( )

	root (`/`) file systems, mirroring ( )

	root disk groups (`rootdg`)
		configuring
			on encapsulated root disks ( )
			on non-root disks ( )
		planning ( )

	root disks
		encapsulating ( )
		mirroring ( )
			caution notice ( )
			planning ( )
		unencapsulating ( )

	root environment, configuring ( )

	`rpcmod` settings, correcting after VxFS installation ( )

	RSMAPI
		See Remote Shared Memory Application Programming Interface (RSMAPI)


S

	`sccheck` command
		preinstallation check ( ) ( ) ( )
		`vfstab` file check ( )

	`scconf` command
		adding nodes to the authentication list ( )
		enabling the `localonly` property ( ) ( ) ( ) ( )
		removing bad interconnect information ( )
		removing nodes from a node list ( ) ( ) ( ) ( )
		verifying install mode ( )
		viewing private hostnames ( )

	`scdidadm` command
		determining device ID (DID) names ( )
		displaying device ID (DID) names ( )

	`scgdevs` command, updating the global-devices namespace ( )

	SCI-PCI adapters
		configuring
			on additional nodes ( )
			on the first node ( )
		installing
			Solaris packages ( )
			Solaris packages with JumpStart ( )
			Sun Cluster packages ( ) ( ) ( )
			Sun Cluster packages with JumpStart ( ) ( )
		package requirements
			Solaris ( )
		port names ( ) ( ) ( )

	`scinstall` command
		installing additional nodes ( )
		installing data services ( )
		installing the first node ( )
		JumpStart installation ( )
		uninstalling Sun Cluster ( )
		upgrading ( )

	`scinstall.log.pid` file ( )

	`scsetup` command
		changing private hostnames ( )
		post-installation setup ( )
		registering disk device groups ( )

	`scstat` command, verifying disk group configurations ( )

	`scswitch` command, evacuating resource groups and device groups ( )

	`scvxinstall` command
		installing VxVM and encapsulating the root disk ( )
		installing VxVM only ( )

	`/sds` partition ( )

	secondary root disks ( )

	serial ports
		configuring on the administrative console ( )
		Simple Network Management Protocol (SNMP) ( )

	`serialports` file ( )

	Simple Network Management Protocol (SNMP), port for Sun Management Center ( )

	single-user non-cluster mode, rebooting into ( )

	SNMP, port for Sun Management Center ( )

	Solaris
		installing
			alone ( )
			with Sun Cluster ( )
		planning ( )
			`/globaldevices` file system ( )
			partitions ( )
			root (`/`) file system ( )
			software groups ( )
			`swap` ( )
			volume managers ( )
		upgrading ( )
		version ( )

	Solaris Volume Manager
		coexistence with VERITAS Volume Manager ( ) ( )
		configuring ( )
		disksets
			adding disk drives ( )
			configuring ( )
			configuring the maximum allowed ( )
			repartitioning disk drives ( )
		`MANPATH` ( )
		`md.tab` file ( )
		mediators
			adding hosts ( )
			checking status ( )
			overview ( ) ( )
			repairing bad data ( )
		mirroring
			global namespace ( )
			root (`/`) file system ( )
			root disks ( )
		planning ( )
		state database replicas ( )
		transactional-volume logging
			planning ( )
		volumes
			activating ( )
			configuring the maximum allowed ( )
			planning the maximum number ( )

	Solstice DiskSuite
		coexistence with VERITAS Volume Manager ( ) ( )
		configuring ( )
		disksets
			adding disk drives ( )
			configuring ( )
			configuring the maximum allowed ( )
			repartitioning disk drives ( )
		installing ( )
			by using SunPlex Manager ( )
			from the Solaris CD-ROM ( )
		`MANPATH` ( )
		`md.tab` file ( )
		mediators
			adding hosts ( )
			checking status ( )
			overview ( ) ( )
			repairing bad data ( )
		metadevices
			activating ( )
			configuring the maximum allowed ( )
			planning the maximum number ( )
		mirroring
			global namespace ( )
			root (`/`) file system ( )
			root disks ( )
		planning ( )
		state database replicas ( )
		trans-metadevice logging
			planning ( )

	`spm` directory, log files ( )

	SSP
		See console-access devices

	stack size setting, correcting after VxFS installation ( )

	starting Sun Management Center ( )

	state database replicas, configuring ( )

	status
		mediators ( )
		Sun Cluster
			installation logs ( )
			SunPlex Manager installation log ( )
			verifying ( )

	Sun Cluster module to Sun Management Center ( )
		adding nodes ( )
		installing ( )
		loading ( )
		requirements ( )

	Sun Enterprise 10000 servers
		dynamic reconfiguration support ( )
		`kernel_cage_enable` variable ( )
		`serialports` file ( )

	Sun Fire 15000 servers
		IP addresses ( )
		serial port numbers ( )

	Sun Management Center
		requirements ( )
		starting ( )
		Sun Cluster module ( )
			adding nodes ( )
			installing ( )
			loading ( )
			online help ( )
			upgrading ( )
		upgrading ( )

	SunPlex Manager ( )
		adding RBAC authorization ( )
		configuring new user accounts ( )
		installing ( )
		using to install software ( )

	swap ( )

	system controllers (SC)
		See console-access devices

	`system` file
		`kernel_cage_enable` variable ( )
		stack size setting ( )

	System Service Processor (SSP)
		See console-access devices


T

	technical support ( )

	`telnet` command, serial port numbers ( )

	terminal concentrators (TC)
		See console-access devices

	test IP addresses, requirements ( )

	three-way mirroring ( )

	transport adapters
		See adapters

	transport junctions
		planning ( )
		port names ( ) ( ) ( )
			planning ( )
		removing bad configuration information ( )


U

	UFS logging
		configuring ( )
		planning ( )

	unencapsulating the root disk ( )

	uninstalling Sun Cluster ( )

	upgrading ( )
		data services ( )
		guidelines for ( )
		resource types ( )
		Solaris ( )
		Sun Cluster module to Sun Management Center ( )
		Sun Management Center ( )
		verifying ( )
		VERITAS Volume Manager (VxVM) ( )

	user accounts, configuring for SunPlex Manager ( )

	`user_attr` file, adding users to ( )

	user work environment, modifying user initialization files ( )

	`/usr/cluster/bin` directory ( )

	`/usr/cluster/bin/scconf` command, adding nodes to the authentication list ( )

	`/usr/cluster/man` directory ( )


V

	`/var/cluster/logs/install/scinstall.log.pid` file ( )

	`/var/cluster/spm` directory ( )

	verifying
		install mode ( )
		preconfiguration requirements ( )
		private hostnames ( )
		upgrade ( )

	VERITAS File System (VxFS)
		administering ( )
		installing ( )
		logging
			configuring ( )
			planning ( )
		`MANPATH` ( )
		mounting cluster file systems ( ) ( )
		`PATH` ( )

	VERITAS Volume Manager (VxVM)
		and Dynamic Multipathing (DMP) ( )
		cluster feature ( )
		configuring
			disk groups ( )
			non-VxVM nodes ( ) ( )
			volumes ( )
		disk device groups
			importing and deporting ( )
			reminoring ( )
		disk groups
			registering as disk device groups ( )
		Dynamic Multipathing (DMP) ( )
		encapsulation ( )
		Enclosure-Based Naming ( )
		installing ( )
			and encapsulating the root disk ( )
			VxVM only ( )
		`MANPATH` ( )
		mirroring the encapsulated root disk ( )
		`PATH` ( )
		planning ( ) ( )
		removing man pages ( ) ( )
		root disk groups (`rootdg`)
			configuring on non-root disks ( )
			planning ( ) ( )
		unencapsulating the root disk ( )
			caution notice ( )
		upgrading ( )
		verifying disk group configurations ( )

	`vfstab` file
		adding mount points ( )
		checking the configuration ( )
		modifying during upgrade ( )

	`vold` daemon ( )

	volume managers
		partitions ( )
		planning
			general ( )
			Solaris Volume Manager ( )
			Solstice DiskSuite ( )
			VERITAS Volume Manager ( )

	volumes
		Solaris Volume Manager
			activating ( )
			configuring the maximum allowed ( )
			planning the maximum number ( )
		VERITAS Volume Manager (VxVM)
			configuring ( )

	VxFS
		See VERITAS File System (VxFS)

	`vxio` driver major number
		configuring on non-VxVM nodes ( ) ( )
		configuring on VxVM–installed nodes ( ) ( )

	VxVM
		See VERITAS Volume Manager (VxVM)


X

	`xntpd.cluster start` command ( )

	`xntpd` daemon, error messages ( )

	`xntpd start` command ( )

Previous: Appendix B Installing and Configuring VERITAS Volume Manager