C H A P T E R 5 |
Managing System Components |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide (820-6410) |
||
Oracle Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide (820-6411) |
||
Oracle Integrated Lights Out Manager (ILOM) 3.0 Management Protocols Reference Guide (820-6413) |
||
The ILOM 3.0 Documentation Collection is available at: http://docs.sun.com/app/docs/prod/int.lights.mgr30#hic. |
View Component Information |
Follow these steps to view component information:
1. Log in to the ILOM SP CLI or the CMM CLI.
-> show component_name type
The properties that display inventory information are listed below. The properties that you are able to view depend on the target type you use.
Prepare to Remove a Component |
Follow these steps to prepare a component for removal:
1. Log in to the ILOM SP CLI or the CMM CLI.
2. At the ILOM command prompt, type:
--> set target prepare_to_remove_action=true
After you prepare the component for removal, you can verify that it is ready to be physically removed.
3. At the ILOM command prompt, type:
--> show target prepare_to_remove_status
-> show /CH/RFM0 prepare_to_remove_status Properties: prepare_to_remove_status = Ready|NotReady Commands: cd set show start stop |
The Ready|NotReady statement in the example shows whether the device is ready to be removed.
Return a Component to Service |
Follow these steps to return a component to service:
Note - If you have already prepared a component for removal, and you wish to undo the action, you can do so remotely. |
1. Log in to the ILOM SP CLI or the CMM CLI.
2. At the ILOM command prompt, type:
--> set target return_to_service_action=true
Enable and Disable Components |
Follow these steps to enable and disable components:
1. Log in to the ILOM SP CLI or the CMM CLI.
2. At the ILOM command prompt, type:
--> set <target> component_state=enabled|disabled
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.