The following table shows the expected behavior of halting or rebooting the control (primary) domain.
The question in Table 9–1 regarding whether domaining is enabled pertains only to the Sun UltraSPARC T1 processors. Otherwise, domaining is always enabled.
Command |
Domaining Enabled? |
Other Domain Configured? |
Behavior |
---|---|---|---|
halt |
Disabled |
N/A |
For Sun UltraSPARC T1 Processors: Drops to the ok prompt. |
|
Enabled |
Not Configured |
For Sun UltraSPARC T1 Processors: System either resets and goes to the OpenBoot ok prompt or goes to the following prompt: r)eset, o)k prompt, or h)alt? For Sun UltraSPARC T2 Processors: Host powered off and stays off until powered on at the SP. |
|
Enabled |
Configured |
Soft resets and boots up if the variable auto-boot?=true. Soft resets and halts at ok prompt if the variable auto-boot?=false. |
reboot |
Disabled |
N/A |
For Sun UltraSPARC T1 Processors: Powers off and powers on the host. |
|
Enabled |
Not Configured |
For Sun UltraSPARC T1 Processors: Powers off and powers on the host. For Sun UltraSPARC T2 Processors: Reboots the host, no power off. |
|
Enabled |
Configured |
For Sun UltraSPARC T1 Processors: Powers off and powers on the host. For Sun UltraSPARC T2 Processors: Reboots the host, no power off. |
shutdown -i 5 |
Disabled |
N/A |
For Sun UltraSPARC T1 Processors: Powers off the host. |
|
Enabled |
Not Configured |
Host powered off, stays off until powered on at the SP. |
|
Enabled |
Configured |
Soft resets and reboots. |