Use the following procedure to set up a terminal on ttya port from the command line.
Determine the port monitor version number.
# ttyadm -V |
The port monitor version number will display.
Enter the following commands and substitute the port monitor version number for ver.
# pmadm -r -p zsmon -s ttya #sacadm -a -p zsmon -t ttymon -c /usr/lib/saf/ttymon -v ver |
For more information, see pmadm(1M) and sacadm(1M) man pages.
Use the pmadm command that matches your terminal type to add a login service.
For EUC terminals, use the following command.
# pmadm -a -p zsmon -s ttya -i root -fu -v ver -m “ `ttyadm -S y \ -T terminal_type -d /dev/ttya -l 9600 -m ldterm,ttcompat -s \ /usr/bin/login`” |
For Korean Packed code terminals that use the KS C 5601-1987 version of Combination code, type the STREAMS module kpack in the ttyadm command.
# pmadm -a -p zsmon -s ttya -i root -fu -v ver -m “`ttyadm -S y \ -T terminal_type -d /dev/ttya -l 9600 -m kpack,ldterm,ttcompat -s \ /usr/bin/login`” |
For Korean Combination code terminals, which use the KS C 5601-1992 version of Combination code, type the STREAMS module kjohap in the ttyadm command.
# pmadm -a -p zsmon -s ttya -i root -fu -v ver -m “`ttyadm -S y \ -T terminal_type -d /dev/ttya -l 9600 -m kjohap,ldterm,ttcompat -s \ /usr/bin/login`” |
Turn on the terminal.
Refer to the documentation that accompanies the terminal.
Log in the terminal.
Check to see that the installation is correct.
# setenv LANG ko # /bin/stty cs8 -istrip defeucw |
These values show that the operating system is set to communicate with the terminal in 8-bit no-parity mode. Make sure the terminal is set up in 8-bit no-parity mode. Refer to the terminal's setup manual for the proper way to set terminal options.