During the process of setting up a print queue, a PPD file that describes the print queue's capabilities can be associated with that print queue. Often, the default values that are described in the PPD file do not match the preferred settings for your site. For example, you might want the duplex feature always turned on, or you might want to always print to A4 sized paper. To modify these default values, you can edit the PPD file directly. However, the easiest and fastest method is to make the changes by using the lpadmin command with the -o option.
Some common PPD file values include:
PageSize
Examples of available choices include:
Letter
Legal
A4
B5
Env10
InputSlot
Examples of available choices include:
Tray1
Tray2
Tray3
Manual
Duplex
Examples of available choices include:
None
DuplexNoTumble
DuplexTumble
This procedure shows how to set default values for a print queue that uses PPD files to describe its capabilities.
Check the PPD file first to determine which values can be overridden. To view information about the PPD file, use the more or less command, or open the file in a text editor.
For example:
$ more /etc/lp/ppd/print-queue.ppd |
Become superuser or assume an equivalent role.
Roles contain authorizations and privileged commands. For more information about roles, see Configuring RBAC (Task Map) in System Administration Guide: Security Services.
Set the desired option.
# lpadmin -p print-queue -o key=value |
Specifies the printer name or print queue where the value is to be changed.
Specifies the options for adjusting printer capabilities, adjusting printer port characteristics, configuring network printers, and controlling the use of banner.
Specifies the key/value pair for the option.
The set of key/value pairs that can be used for a particular printer depends on the content of the PPD file that is associated with the print queue.
For example, to set the duplex feature, type:
# lpadmin -p print-queue -o Duplex=DuplexNoTumble |
To change the input tray setting, type:
# lpadmin -p print-queue -o InputSlot=Tray2 |
You can set the default value this way for any PPD file/foomatic option.
Verify that the option was set to the correct value by checking the print queue's capabilities.
# lpstat -p print-queue -l |
# lpadmin -p hp4550 -o Media=A4 -o InputSlot=Tray2 # lpadmin -p hp4550 -o PageSize=A4 # lpstat -p hp4550 -l printer hp4550 idle. enabled since December 5, 2006 6:38:50 PM CET. available. Form mounted: Content types: application/postscript Description: Connection: Interface: /usr/lib/lp/model/netstandard_foomatic PPD: /usr/lib/lp/model/ppd/system/foomatic/ \ HP/HP-Color_LaserJet_4550-Postscript.ppd.gz On fault: write root After fault: continue Users allowed: (all) Forms allowed: (none) Media supported: Letter A4 11x17 A3 A5 B5 Env10 EnvC5 EnvDL EnvISOB5 EnvMonarch Executive Legal Banner not required Character sets: (none) Default pitch: Default page size: Default port setting: Options: PageSize=A4, Media=A4, InputSlot=Tray2, \ dest=192.168.245.62:9100, protocol=tcp # uname -a SunOS shuttle 5.11 snv_52 i86pc i386 i86pc # lpstat -p hp4550 -l printer hp4550 idle. enabled since December 5, 2006 6:38:50 PM CET. available. Form mounted: Content types: application/postscript Description: Connection: Interface: /usr/lib/lp/model/netstandard_foomatic PPD: /usr/lib/lp/model/ppd/system/foomatic/ \ HP/HP-Color_LaserJet_4550-Postscript.ppd.gz On fault: write root After fault: continue Users allowed: (all) Forms allowed: (none) Media supported: Letter A4 11x17 A3 A5 B5 Env10 EnvC5 EnvDL EnvISOB5 EnvMonarch Executive Legal Banner not required Character sets: (none) Default pitch: Default page size: Default port setting: Options: dest=192.168.245.62:9100, protocol=tcp |